Torus
In geometry, a torus (plural tori) is a surface of revolution generated by revolving a circle in threedimensional space about an axis coplanar with the circle. If the axis of revolution does not touch the circle, the surface has a ring shape and is called a torus of revolution.
Realworld examples of toroidal objects include inner tubes. A torus should not be confused with a solid torus, which is formed by rotating a disc, rather than a circle, around an axis. A solid torus is a torus plus the volume inside the torus. Realworld approximations include doughnuts, noninflatable lifebuoys, and Orings.
In topology, a ring torus is homeomorphic to the Cartesian product of two circles: S^{1} × S^{1}, and the latter is taken to be the definition in that context. It is a compact 2manifold of genus 1. The ring torus is one way to embed this space into Euclidean space, but another way to do this is the Cartesian product of the embedding of S^{1} in the plane with itself. This produces a geometric object called the Clifford torus, a surface in 4space.
In the field of topology, a torus is any topological space that is topologically equivalent to a torus.^{[1]} A coffee cup and a doughnut are both topological tori.
Contents
Geometry
vertical crosssections
A torus can be defined parametrically by:^{[2]}
where
 θ, φ are angles which make a full circle, so that their values start and end at the same point,
 R is the distance from the center of the tube to the center of the torus,
 r is the radius of the tube.
R is known as the "major radius" and r is known as the "minor radius".^{[3]} The ratio R divided by r is known as the "aspect ratio". The typical doughnut confectionery has an aspect ratio of about 3 to 2.
An implicit equation in Cartesian coordinates for a torus radially symmetric about the zaxis is
or the solution of f(x, y, z) = 0, where
Algebraically eliminating the square root gives a quartic equation,
The three different classes of standard tori correspond to the three possible aspect ratios between R and r:
 When R > r, the surface will be the familiar ring torus or anchor ring.
 R = r corresponds to the horn torus, which in effect is a torus with no "hole".
 R < r describes the selfintersecting spindle torus.
 When R = 0, the torus degenerates to the sphere.
When R ≥ r, the interior
of this torus is diffeomorphic (and, hence, homeomorphic) to a product of a Euclidean open disc and a circle. The volume of this solid torus and the surface area of its torus are easily computed using Pappus's centroid theorem, giving^{[4]}
These formulas are the same as for a cylinder of length 2πR and radius r, obtained from cutting the tube along the plane of a small circle, and unrolling it by straightening out (rectifying) the line running around the center of the tube. The losses in surface area and volume on the inner side of the tube exactly cancel out the gains on the outer side.
Expressing the surface area and the volume by the distance p of an outermost point on the surface of the torus to the center, and the distance q of an innermost point (so that R = p + q/2 and r = p − q/2), yields
As a torus is the product of two circles, a modified version of the spherical coordinate system is sometimes used. In traditional spherical coordinates there are three measures, R, the distance from the center of the coordinate system, and θ and φ, angles measured from the center point.
As a torus has, effectively, two center points, the centerpoints of the angles are moved; φ measures the same angle as it does in the spherical system, but is known as the "toroidal" direction. The center point of θ is moved to the center of r, and is known as the "poloidal" direction. These terms were first used in a discussion of the Earth's magnetic field, where "poloidal" was used to denote "the direction toward the poles".^{[5]}
In modern use these terms are more commonly used to discuss magnetic confinement fusion devices.
Topology
This section includes a list of references, related reading or external links, but its sources remain unclear because it lacks inline citations. (November 2015) (Learn how and when to remove this template message)

Topologically, a torus is a closed surface defined as the product of two circles: S^{1} × S^{1}. This can be viewed as lying in C^{2} and is a subset of the 3sphere S^{3} of radius √2. This topological torus is also often called the Clifford torus. In fact, S^{3} is filled out by a family of nested tori in this manner (with two degenerate circles), a fact which is important in the study of S^{3} as a fiber bundle over S^{2} (the Hopf bundle).
The surface described above, given the relative topology from R^{3}, is homeomorphic to a topological torus as long as it does not intersect its own axis. A particular homeomorphism is given by stereographically projecting the topological torus into R^{3} from the north pole of S^{3}.
The torus can also be described as a quotient of the Cartesian plane under the identifications
or, equivalently, as the quotient of the unit square by pasting the opposite edges together, described as a fundamental polygon ABA^{−1}B^{−1}.
The fundamental group of the torus is just the direct product of the fundamental group of the circle with itself:
Intuitively speaking, this means that a closed path that circles the torus' "hole" (say, a circle that traces out a particular latitude) and then circles the torus' "body" (say, a circle that traces out a particular longitude) can be deformed to a path that circles the body and then the hole. So, strictly 'latitudinal' and strictly 'longitudinal' paths commute. An equivalent statement may be imagined as two shoelaces passing through each other, then unwinding, then rewinding.
If a torus is punctured and turned inside out then another torus results, with lines of latitude and longitude interchanged. This is equivalent to building a torus from a cylinder, by joining the circular ends together, in two different ways: around the outside like joining two ends of a garden hose, or through the inside like rolling a sock (with the toe cut off). Additionally, if the cylinder was made by gluing two opposite sides of a rectangle together, choosing the other two sides instead will cause the same reversal of orientation.
The first homology group of the torus is isomorphic to the fundamental group (this follows from Hurewicz theorem since the fundamental group is abelian).
Twosheeted cover
The 2torus doublecovers the 2sphere, with four ramification points. Every conformal structure on the 2torus can be represented as a twosheeted cover of the 2sphere. The points on the torus corresponding to the ramification points are the Weierstrass points. In fact, the conformal type of the torus is determined by the crossratio of the four points.
ndimensional torus
The torus has a generalization to higher dimensions, the ndimensional torus, often called the ntorus or hypertorus for short. (This is one of two different meanings of the term "ntorus".) Recalling that the torus is the product space of two circles, the ndimensional torus is the product of n circles. That is:
The 1torus is just the circle: T^{1} = S^{1}. The torus discussed above is the 2torus, T^{2}. And similar to the 2torus, the ntorus, T^{n} can be described as a quotient of R^{n} under integral shifts in any coordinate. That is, the ntorus is R^{n} modulo the action of the integer lattice Z^{n} (with the action being taken as vector addition). Equivalently, the ntorus is obtained from the ndimensional hypercube by gluing the opposite faces together.
An ntorus in this sense is an example of an ndimensional compact manifold. It is also an example of a compact abelian Lie group. This follows from the fact that the unit circle is a compact abelian Lie group (when identified with the unit complex numbers with multiplication). Group multiplication on the torus is then defined by coordinatewise multiplication.
Toroidal groups play an important part in the theory of compact Lie groups. This is due in part to the fact that in any compact Lie group G one can always find a maximal torus; that is, a closed subgroup which is a torus of the largest possible dimension. Such maximal tori T have a controlling role to play in theory of connected G. Toroidal groups are examples of protori, which (like tori) are compact connected abelian groups, which are not required to be manifolds.
Automorphisms of T are easily constructed from automorphisms of the lattice Z^{n}, which are classified by invertible integral matrices of size n with an integral inverse; these are just the integral matrices with determinant ±1. Making them act on R^{n} in the usual way, one has the typical toral automorphism on the quotient.
The fundamental group of an ntorus is a free abelian group of rank n. The kth homology group of an ntorus is a free abelian group of rank n choose k. It follows that the Euler characteristic of the ntorus is 0 for all n. The cohomology ring H^{•}(T^{n}, Z) can be identified with the exterior algebra over the Zmodule Z^{n} whose generators are the duals of the n nontrivial cycles.
Configuration space
As the ntorus is the nfold product of the circle, the ntorus is the configuration space of n ordered, not necessarily distinct points on the circle. Symbolically, T^{n} = (S^{1})^{n}. The configuration space of unordered, not necessarily distinct points is accordingly the orbifold T^{n}/S_{n}, which is the quotient of the torus by the symmetric group on n letters (by permuting the coordinates).
For n = 2, the quotient is the Möbius strip, the edge corresponding to the orbifold points where the two coordinates coincide. For n = 3 this quotient may be described as a solid torus with crosssection an equilateral triangle, with a twist; equivalently, as a triangular prism whose top and bottom faces are connected with a 1/3 twist (120°): the 3dimensional interior corresponds to the points on the 3torus where all 3 coordinates are distinct, the 2dimensional face corresponds to points with 2 coordinates equal and the 3rd different, while the 1dimensional edge corresponds to points with all 3 coordinates identical.
These orbifolds have found significant applications to music theory in the work of Dmitri Tymoczko and collaborators (Felipe Posada and Michael Kolinas, et al.), being used to model musical triads.^{[6]}^{[7]}
Flat torus
In three dimensions, one can bend a rectangle into a torus, but doing this typically stretches the surface, as seen by the distortion of the checkered pattern. 
Seen in stereographic projection, a 4D flat torus can be projected into 3dimensions and rotated on a fixed axis. 
The flat torus is a torus with the metric inherited from its representation as the quotient, R^{2}/L, where L is a discrete subgroup of R^{2} isomorphic to Z^{2}. This gives the quotient the structure of a Riemannian manifold. Perhaps the simplest example of this is when L = Z^{2}: R^{2}/Z^{2}, which can also be described as the Cartesian plane under the identifications (x, y) ~ (x + 1, y) ~ (x, y + 1). This particular flat torus (and any uniformly scaled version of it) is known as the "square" flat torus.
This metric of the square flat torus can also be realised by specific embeddings of the familiar 2torus into Euclidean 4space or higher dimensions. Its surface has zero Gaussian curvature everywhere. Its surface is "flat" in the same sense that the surface of a cylinder is "flat". In 3 dimensions one can bend a flat sheet of paper into a cylinder without stretching the paper, but you cannot then bend this cylinder into a torus without stretching the paper (unless you give up some regularity and differentiability conditions, see below).
A simple 4dimensional Euclidean embedding of a rectangular flat torus (more general than the square one) is as follows:
where R and P are constants determining the aspect ratio. It is diffeomorphic to a regular torus but not isometric. It can not be analytically embedded (smooth of class C^{k}, 2 ≤ k ≤ ∞) into Euclidean 3space. Mapping it into 3space requires you to stretch it, in which case it looks like a regular torus, for example, the following map
If R and P in the above flat torus form a unit vector (R, P) = (cos(η), sin(η)) then u, v, and η can be used to parameterize the unit 3sphere in a parameterization associated with the Hopf map. In particular, for certain very specific choices of a square flat torus in the 3sphere S^{3}, where η = π/4 above, the torus will partition the 3sphere into two congruent solid tori subsets with the aforesaid flat torus surface as their common boundary. One example is the torus T defined by
Other tori in S^{3} having this partitioning property include the square tori of the form Q⋅T, where Q is a rotation of 4dimensional space R^{4}, or in other words Q is a member of the Lie group SO(4).
It is known that there exists no C^{2} (twice continuously differentiable) embedding of a flat torus into 3space. (The idea of the proof is to take a large sphere containing such a flat torus in its interior, and shrink the radius of the sphere until it just touches the torus for the first time. Such a point of contact must be a tangency. But that would imply that part of the torus, since it has zero curvature everywhere, must lie strictly outside the sphere, which is a contradiction.) On the other hand, according to the NashKuiper theorem, proven in the 1950s, an isometric C^{1} embedding exists. This is solely an existence proof, and does not provide explicit equations for such an embedding.
In April 2012, an explicit C^{1} (continuously differentiable) embedding of a flat torus into 3dimensional Euclidean space R^{3} was found.^{[8]}^{[9]}^{[10]}^{[11]} It is similar in structure to a fractal as it is constructed by repeatedly corrugating a normal torus. Like fractals, it has no defined Gaussian curvature. However, unlike fractals, it does have defined surface normals. It "is" a flat torus in the sense that as metric spaces, it is isometric to a flat square torus. (These infinitely recursive corrugations are used only for embedding into three dimensions; they are not an intrinsic feature of the flat torus.) This is the first time that any such embedding was defined by explicit equations, or depicted by computer graphics.
Genus g surface
In the theory of surfaces there is another object, the "genus" g surface. Instead of the product of n circles, a genus g surface is the connected sum of g twotori. To form a connected sum of two surfaces, remove from each the interior of a disk and "glue" the surfaces together along the boundary circles. To form the connected sum of more than two surfaces, sum two of them at a time until they are all connected. In this sense, a genus g surface resembles the surface of g doughnuts stuck together side by side, or a 2sphere with g handles attached.
As examples, a genus zero surface (without boundary) is the twosphere while a genus one surface (without boundary) is the ordinary torus. The surfaces of higher genus are sometimes called nholed tori (or, rarely, nfold tori). The terms double torus and triple torus are also occasionally used.
The classification theorem for surfaces states that every compact connected surface is topologically equivalent to either the sphere or the connect sum of some number of tori, disks, and real projective planes.
genus two 
genus three 
Toroidal polyhedra
Polyhedra with the topological type of a torus are called toroidal polyhedra, and have Euler characteristic V − E + F = 0. For any number holes, the formula generalizes to V − E + F = 2 − 2N, where N is the number of holes.
The term "toroidal polyhedron" is also used for highergenus polyhedra and for immersions of toroidal polyhedra.
This section needs expansion. You can help by adding to it. (April 2010)

Automorphisms
The homeomorphism group (or the subgroup of diffeomorphisms) of the torus is studied in geometric topology. Its mapping class group ( the connected components of the homeomorphism group) is isomorphic to the group GL(n, Z) of invertible integer matrices, and can be realized as linear maps on the universal covering space R^{n} that preserve the standard lattice Z^{n} (this corresponds to integer coefficients) and thus descend to the quotient.
At the level of homotopy and homology, the mapping class group can be identified as the action on the first homology (or equivalently, first cohomology, or on the fundamental group, as these are all naturally isomorphic; also the first cohomology group generates the cohomology algebra:
Since the torus is an Eilenberg–MacLane space K(G, 1), its homotopy equivalences, up to homotopy, can be identified with automorphisms of the fundamental group); that this agrees with the mapping class group reflects that all homotopy equivalences can be realized by homeomorphisms – every homotopy equivalence is homotopic to a homeomorphism – and that homotopic homeomorphisms are in fact isotopic (connected through homeomorphisms, not just through homotopy equivalences). More tersely, the map Homeo(T^{n}) → SHE(T^{n}) is 1connected (isomorphic on pathcomponents, onto fundamental group). This is a "homeomorphism reduces to homotopy reduces to algebra" result.
Thus the short exact sequence of the mapping class group splits (an identification of the torus as the quotient of R^{n} gives a splitting, via the linear maps, as above):
so the homeomorphism group of the torus is a semidirect product,
The mapping class group of higher genus surfaces is much more complicated, and an area of active research.
Coloring a torus
The torus's Heawood number is seven, meaning every graph that can be embedded on the torus has a chromatic number of at most seven. (Since the complete graph can be embedded on the torus, and , the upper bound is tight.) Equivalently, in a torus divided into regions, it is always possible to color the regions using no more than seven colors so that no neighboring regions are the same color. (Contrast with the four color theorem for the plane.)
Cutting a torus
A solid torus of revolution can be cut by n (> 0) planes into maximally
parts.^{[12]}
The first 11 numbers of parts, for 0 ≤ n ≤ 10 (including the case of n = 0, not covered by the above formulas), are as follows:
See also
 Algebraic torus
 Angenent torus
 Annulus (mathematics)
 Clifford torus
 Complex torus
 Dupin cyclide
 Elliptic curve
 Irrational cable on a torus
 Joint European Torus
 Klein Bottle
 Loewner's torus inequality
 Maximal torus
 Period lattice
 Real projective plane
 Sphere
 Spiric section
 Surface
 Toric lens
 Toric section
 Toric variety
 Toroid
 Toroidal and poloidal
 Torusbased cryptography
 Torus knot
 Umbilic torus
 Villarceau circles
Notes
 Nociones de Geometría Analítica y Álgebra Lineal, ISBN 9789701065969, Author: Kozak Ana Maria, Pompeya Pastorelli Sonia, Verdanega Pedro Emilio, Editorial: McGrawHill, Edition 2007, 744 pages, language: Spanish
 Allen Hatcher. Algebraic Topology. Cambridge University Press, 2002. ISBN 0521795400.
 V. V. Nikulin, I. R. Shafarevich. Geometries and Groups. Springer, 1987. ISBN 3540152814, ISBN 9783540152811.
 "Tore (notion géométrique)" at Encyclopédie des Formes Mathématiques Remarquables
References
 ^ Gallier, Jean; Xu, Dianna (2013). A Guide to the Classification Theorem for Compact Surfaces (PDF). Geometry and Computing. 9. Springer, Heidelberg. doi:10.1007/9783642343643. ISBN 9783642343636. MR 3026641.
 ^ "Equations for the Standard Torus". Geom.uiuc.edu. 6 July 1995. Archived from the original on 29 April 2012. Retrieved 21 July 2012.
 ^ "Torus". Spatial Corp. Archived from the original on 13 December 2014. Retrieved 16 November 2014.
 ^ Weisstein, Eric W. "Torus". MathWorld.
 ^ "poloidal". Oxford English Dictionary Online. Oxford University Press. Retrieved 10 August 2007.
 ^ Tymoczko, Dmitri (7 July 2006). "The Geometry of Musical Chords" (PDF). Science. 313 (5783): 72–74. CiteSeerX 10.1.1.215.7449. doi:10.1126/science.1126287. PMID 16825563. Archived (PDF) from the original on 25 July 2011.
 ^ Tony Phillips, Tony Phillips' Take on Math in the Media Archived 5 October 2008 at the Wayback Machine, American Mathematical Society, October 2006
 ^ Filippelli, Gianluigi (27 April 2012). "Doc Madhattan: A flat torus in three dimensional space". Proceedings of the National Academy of Sciences. 109 (19): 7218–7223. doi:10.1073/pnas.1118478109. Archived from the original on 25 June 2012. Retrieved 21 July 2012.
 ^ "Mathematicians Produce FirstEver Image of Flat Torus in 3D  Mathematics". SciNews.com. 18 April 2012. Archived from the original on 1 June 2012. Retrieved 21 July 2012.
 ^ "Mathematics : firstever image of a flat torus in 3D  CNRS Web site  CNRS". Archived from the original on 5 July 2012. Retrieved 21 July 2012.
 ^ "Flat tori finally visualized!". Math.univlyon1.fr. 18 April 2012. Archived from the original on 18 June 2012. Retrieved 21 July 2012.
 ^ Weisstein, Eric W. "Torus Cutting". MathWorld.
External links
Look up torus in Wiktionary, the free dictionary. 
Wikimedia Commons has media related to Torus. 
 Creation of a torus at cuttheknot
 "4D torus" Flythrough crosssections of a fourdimensional torus.
 "Relational Perspective Map" Visualizing high dimensional data with flat torus.
 Polydos
 Séquin, Carlo H. "Topology of a Twisted Torus  Numberphile" (video). Brady Haran. Retrieved 27 January 2014.