Power (physics)
Power  

Common symbols 
P 
SI unit  watt 
In SI base units  kg⋅m^{2}⋅s^{−3} 
Derivations from other quantities 
Part of a series of articles about 
Classical mechanics 

Core topics

In physics, power is the rate of doing work or transferring heat, the amount of energy transferred or converted per unit time. Having no direction, it is a scalar quantity. In the International System of Units, the unit of power is the joule per second (J/s), known as the watt in honour of James Watt, the eighteenthcentury developer of the condenser steam engine. Another common and traditional measure is horsepower (comparing to the power of a horse). Being the rate of work, the equation for power can be written:
As a physical concept, power requires both a change in the physical system and a specified time in which the change occurs. This is distinct from the concept of work, which is only measured in terms of a net change in the state of the physical system. The same amount of work is done when carrying a load up a flight of stairs whether the person carrying it walks or runs, but more power is needed for running because the work is done in a shorter amount of time.
The output power of an electric motor is the product of the torque that the motor generates and the angular velocity of its output shaft. The power involved in moving a vehicle is the product of the traction force of the wheels and the velocity of the vehicle. The rate at which a light bulb converts electrical energy into light and heat is measured in watts—the higher the wattage, the more power, or equivalently the more electrical energy is used per unit time.^{[1]}^{[2]}
Contents
Units
The dimension of power is energy divided by time. The SI unit of power is the watt (W), which is equal to one joule per second. Other units of power include ergs per second (erg/s), horsepower (hp), metric horsepower (Pferdestärke (PS) or cheval vapeur (CV)), and footpounds per minute. One horsepower is equivalent to 33,000 footpounds per minute, or the power required to lift 550 pounds by one foot in one second, and is equivalent to about 746 watts. Other units include dBm, a relative logarithmic measure with 1 milliwatt as reference; food calories per hour (often referred to as kilocalories per hour); BTU per hour (BTU/h); and tons of refrigeration (12,000 BTU/h).
Equations for power
Power, as a function of time, is the rate at which work is done, so can be expressed by this equation:
where P is power, W is work, and t is time. Because work is a force F applied over a distance r,
for a constant force, power can be rewritten as:
Average power
As a simple example, burning one kilogram of coal releases much more energy than does detonating a kilogram of TNT,^{[3]} but because the TNT reaction releases energy much more quickly, it delivers far more power than the coal. If ΔW is the amount of work performed during a period of time of duration Δt, the average power P_{avg} over that period is given by the formula
It is the average amount of work done or energy converted per unit of time. The average power is often simply called "power" when the context makes it clear.
The instantaneous power is then the limiting value of the average power as the time interval Δt approaches zero.
In the case of constant power P, the amount of work performed during a period of duration T is given by:
In the context of energy conversion, it is more customary to use the symbol E rather than W.
Mechanical power
Power in mechanical systems is the combination of forces and movement. In particular, power is the product of a force on an object and the object's velocity, or the product of a torque on a shaft and the shaft's angular velocity.
Mechanical power is also described as the time derivative of work. In mechanics, the work done by a force F on an object that travels along a curve C is given by the line integral:
where x defines the path C and v is the velocity along this path.
If the force F is derivable from a potential (conservative), then applying the gradient theorem (and remembering that force is the negative of the gradient of the potential energy) yields:
where A and B are the beginning and end of the path along which the work was done.
The power at any point along the curve C is the time derivative
In one dimension, this can be simplified to:
In rotational systems, power is the product of the torque τ and angular velocity ω,
where ω measured in radians per second. The represents scalar product.
In fluid power systems such as hydraulic actuators, power is given by
where p is pressure in pascals, or N/m^{2} and Q is volumetric flow rate in m^{3}/s in SI units.
Mechanical advantage
If a mechanical system has no losses, then the input power must equal the output power. This provides a simple formula for the mechanical advantage of the system.
Let the input power to a device be a force F_{A} acting on a point that moves with velocity v_{A} and the output power be a force F_{B} acts on a point that moves with velocity v_{B}. If there are no losses in the system, then
and the mechanical advantage of the system (output force per input force) is given by
The similar relationship is obtained for rotating systems, where T_{A} and ω_{A} are the torque and angular velocity of the input and T_{B} and ω_{B} are the torque and angular velocity of the output. If there are no losses in the system, then
which yields the mechanical advantage
These relations are important because they define the maximum performance of a device in terms of velocity ratios determined by its physical dimensions. See for example gear ratios.
Electrical power
The instantaneous electrical power P delivered to a component is given by
where
 P(t) is the instantaneous power, measured in watts (joules per second)
 V(t) is the potential difference (or voltage drop) across the component, measured in volts
 I(t) is the current through it, measured in amperes
If the component is a resistor with timeinvariant voltage to current ratio, then:
where
is the resistance, measured in ohms.
Peak power and duty cycle
In the case of a periodic signal of period , like a train of identical pulses, the instantaneous power is also a periodic function of period . The peak power is simply defined by:
 .
The peak power is not always readily measurable, however, and the measurement of the average power is more commonly performed by an instrument. If one defines the energy per pulse as:
then the average power is:
 .
One may define the pulse length such that so that the ratios
are equal. These ratios are called the duty cycle of the pulse train.
Radiant power
Power is related to intensity at a distance ; the power emitted by a source can be written as:^{[citation needed]}
See also
 Simple machines
 Motive power
 Orders of magnitude (power)
 Pulsed power
 Intensity — in the radiative sense, power per area
 Power gain — for linear, twoport networks.
 Power density
 Signal strength
 Sound power
References
 ^ Halliday and Resnick (1974). "6. Power". Fundamentals of Physics.
 ^ Chapter 13, § 3, pp 132,3 The Feynman Lectures on Physics Volume I, 1963
 ^ Burning coal produces around 1530 megajoules per kilogram, while detonating TNT produces about 4.7 megajoules per kilogram. For the coal value, see Fisher, Juliya (2003). "Energy Density of Coal". The Physics Factbook. Retrieved 30 May 2011. For the TNT value, see the article TNT equivalent. Neither value includes the weight of oxygen from the air used during combustion.