MyRIO

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search
MyRIO
Manufacturer National Instruments
Available In production
Website www.ni.com/myrio

MyRIO is a real-time embedded evaluation board made by National Instruments. It is used to develop applications that utilize its onboard FPGA and microprocessor. It requires LabVIEW. It's geared towards students and basic applications.[1]

Specifications

(for myRIO-1900)

  • Xilinx Z-7010 processor 667 MHz (ARM Cortex A9 x2 cores 28 nm process NEON SIMD, VFPv3 Vector Float)
  • Memory: NV: 256 MB, DDR3 512MB, 533 MHz, 16 bits
  • FPGA type same as processor
  • Wireless: IEEE 802.11 b,g,n ISM 2.4 GHz 20 MHz.
  • USB 2.0 Hi-Speed
  • Breakout Board support
  • 2 ports of 16 Digital I/O lines
  • 3 axis accelerometer
  • Max power consumption : 14 W
  • Typical idle : 2.6 W
  • LED's

Similar products

cRIO (compactRIO) myDAQ

References

  1. ^ "From Student to Engineer: Preparing Future Innovators With the NI LabVIEW RIO Architecture — National Instruments". Ni.com. 2014-04-01. Retrieved 2016-07-26. 
Retrieved from "https://en.wikipedia.org/w/index.php?title=MyRIO&oldid=797220745"
This content was retrieved from Wikipedia : http://en.wikipedia.org/wiki/MyRIO
This page is based on the copyrighted Wikipedia article "MyRIO"; it is used under the Creative Commons Attribution-ShareAlike 3.0 Unported License (CC-BY-SA). You may redistribute it, verbatim or modified, providing that you comply with the terms of the CC-BY-SA