Monotonic function
This article includes a list of references, but its sources remain unclear because it has insufficient inline citations. (January 2012) (Learn how and when to remove this template message)

In mathematics, a monotonic function (or monotone function) is a function between ordered sets that preserves or reverses the given order. This concept first arose in calculus, and was later generalized to the more abstract setting of order theory.
Contents
Monotonicity in calculus and analysis
In calculus, a function defined on a subset of the real numbers with real values is called monotonic if and only if it is either entirely nonincreasing, or entirely nondecreasing. That is, as per Fig. 1, a function that increases monotonically does not exclusively have to increase, it simply must not decrease.
A function is called monotonically increasing (also increasing or nondecreasing), if for all and such that one has , so preserves the order (see Figure 1). Likewise, a function is called monotonically decreasing (also decreasing or nonincreasing) if, whenever , then , so it reverses the order (see Figure 2).
If the order in the definition of monotonicity is replaced by the strict order , then one obtains a stronger requirement. A function with this property is called strictly increasing. Again, by inverting the order symbol, one finds a corresponding concept called strictly decreasing. Functions that are strictly increasing or decreasing are onetoone (because for not equal to , either or and so, by monotonicity, either or , thus is not equal to .)
When functions between discrete sets are considered in combinatorics, it is not always obvious that "increasing" and "decreasing" are taken to include the possibility of repeating the same value at successive arguments, so one finds the terms weakly increasing and weakly decreasing to stress this possibility.
The terms "nondecreasing" and "nonincreasing" should not be confused with the (much weaker) negative qualifications "not decreasing" and "not increasing". For example, the function of figure 3 first falls, then rises, then falls again. It is therefore not decreasing and not increasing, but it is neither nondecreasing nor nonincreasing.
A function is said to be absolutely monotonic over an interval if the derivatives of all orders of are nonnegative or all nonpositive at all points on the interval.
Monotonic transformation
The term monotonic transformation (or monotone transformation) can also possibly cause some confusion because it refers to a transformation by a strictly increasing function. This is the case in economics with respect to the ordinal properties of a utility function being preserved across a monotonic transform (see also monotone preferences).^{[1]} In this context, what we are calling a "monotonic transformation" is, more accurately, called a "positive monotonic transformation", in order to distinguish it from a “negative monotonic transformation,” which reverses the order of the numbers.^{[2]}
Some basic applications and results
The following properties are true for a monotonic function :
 has limits from the right and from the left at every point of its domain;
 has a limit at positive or negative infinity ( ) of either a real number, , or .
 can only have jump discontinuities;
 can only have countably many discontinuities in its domain. The discontinuities, however, do not necessarily consist of isolated points and may even be dense in an interval (a,b).
These properties are the reason why monotonic functions are useful in technical work in analysis. Two facts about these functions are:
 if is a monotonic function defined on an interval , then is differentiable almost everywhere on , i.e. the set of numbers in such that is not differentiable in has Lebesgue measure zero. In addition, this result cannot be improved to countable: see Cantor function.
 if is a monotonic function defined on an interval , then is Riemann integrable.
An important application of monotonic functions is in probability theory. If is a random variable, its cumulative distribution function is a monotonically increasing function.
A function is unimodal if it is monotonically increasing up to some point (the mode) and then monotonically decreasing.
When is a strictly monotonic function, then is injective on its domain, and if is the range of , then there is an inverse function on for .
Monotonicity in topology
A map is said to be monotone if each of its fibers is connected i.e. for each element in the (possibly empty) set is connected.
Monotonicity in functional analysis
In functional analysis on a topological vector space , a (possibly nonlinear) operator is said to be a monotone operator if
Kachurovskii's theorem shows that convex functions on Banach spaces have monotonic operators as their derivatives.
A subset of is said to be a monotone set if for every pair and in ,
is said to be maximal monotone if it is maximal among all monotone sets in the sense of set inclusion. The graph of a monotone operator is a monotone set. A monotone operator is said to be maximal monotone if its graph is a maximal monotone set.
Monotonicity in order theory
Order theory deals with arbitrary partially ordered sets and preordered sets in addition to real numbers. The above definition of monotonicity is relevant in these cases as well. However, the terms "increasing" and "decreasing" are avoided, since their conventional pictorial representation does not apply to orders that are not total. Furthermore, the strict relations < and > are of little use in many nontotal orders and hence no additional terminology is introduced for them.
A monotone function is also called isotone, or orderpreserving. The dual notion is often called antitone, antimonotone, or orderreversing. Hence, an antitone function f satisfies the property
 x ≤ y implies f(x) ≥ f(y),
for all x and y in its domain. The composite of two monotone mappings is also monotone.
A constant function is both monotone and antitone; conversely, if f is both monotone and antitone, and if the domain of f is a lattice, then f must be constant.
Monotone functions are central in order theory. They appear in most articles on the subject and examples from special applications are found in these places. Some notable special monotone functions are order embeddings (functions for which x ≤ y if and only if f(x) ≤ f(y)) and order isomorphisms (surjective order embeddings).
Monotonicity in the context of search algorithms
In the context of search algorithms monotonicity (also called consistency) is a condition applied to heuristic functions. A heuristic h(n) is monotonic if, for every node n and every successor n' of n generated by any action a, the estimated cost of reaching the goal from n is no greater than the step cost of getting to n' plus the estimated cost of reaching the goal from n' ,
This is a form of triangle inequality, with n, n', and the goal G_{n} closest to n. Because every monotonic heuristic is also admissible, monotonicity is a stricter requirement than admissibility. In some heuristic algorithms, such as A*, the algorithm can be considered optimal if it is monotonic.^{[3]}
Boolean functions
In Boolean algebra, a monotonic function is one such that for all a_{i} and b_{i} in {0,1}, if a_{1} ≤ b_{1}, a_{2} ≤ b_{2}, ..., a_{n} ≤ b_{n} (i.e. the Cartesian product {0, 1}^{n} is ordered coordinatewise), then f(a_{1}, ..., a_{n}) ≤ f(b_{1}, ..., b_{n}). In other words, a Boolean function is monotonic if, for every combination of inputs, switching one of the inputs from false to true can only cause the output to switch from false to true and not from true to false. Graphically, this means that a Boolean function is monotonic when in its Hasse diagram (dual of its Venn diagram), there is no 1 connected to a higher 0.
The monotonic Boolean functions are precisely those that can be defined by an expression combining the inputs (which may appear more than once) using only the operators and and or (in particular not is forbidden). For instance "at least two of a,b,c hold" is a monotonic function of a,b,c, since it can be written for instance as ((a and b) or (a and c) or (b and c)).
The number of such functions on n variables is known as the Dedekind number of n.
See also
 Monotone cubic interpolation
 Pseudomonotone operator
 Spearman's rank correlation coefficient  measure of how monotonic a set of data
 Total monotonicity
Notes
 ^ See the section on Cardinal Versus Ordinal Utility in Simon & Blume (1994).
 ^ Varian, Hal R. (2010). Intermediate Microeconomics (8th ed.). W. W. Norton & Company. p. 56. ISBN 9780393934243.
 ^ Conditions for optimality: Admissibility and consistency pg. 9495 (Russell & Norvig 2010).
Bibliography
 Bartle, Robert G. (1976). The elements of real analysis (second ed.).
 Grätzer, George (1971). Lattice theory: first concepts and distributive lattices. ISBN 0716704420.
 Pemberton, Malcolm; Rau, Nicholas (2001). Mathematics for economists: an introductory textbook. Manchester University Press. ISBN 0719033411.
 Renardy, Michael & Rogers, Robert C. (2004). An introduction to partial differential equations. Texts in Applied Mathematics 13 (Second ed.). New York: SpringerVerlag. p. 356. ISBN 0387004440.
 Riesz, Frigyes & Béla SzőkefalviNagy (1990). Functional Analysis. Courier Dover Publications. ISBN 9780486662893.
 Russell, Stuart J.; Norvig, Peter (2010). Artificial Intelligence: A Modern Approach (3rd ed.). Upper Saddle River, New Jersey: Prentice Hall. ISBN 9780136042594.
 Simon, Carl P.; Blume, Lawrence (April 1994). Mathematics for Economists (first ed.). ISBN 9780393957334. (Definition 9.31)
External links
 Hazewinkel, Michiel, ed. (2001) [1994], "Monotone function", Encyclopedia of Mathematics, Springer Science+Business Media B.V. / Kluwer Academic Publishers, ISBN 9781556080104
 Convergence of a Monotonic Sequence by Anik Debnath and Thomas Roxlo (The Harker School), Wolfram Demonstrations Project.
 Weisstein, Eric W. "Monotonic Function". MathWorld.