DR Class 52.80

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search
DR Class 52.80
Locomotive BR52-8177-9.jpg
Rekolok 52 8177
Number(s) DR 52 8001–8200
Quantity 200
Manufacturer RAW Stendal
Year(s) of manufacture 1960–1967
Retired In service until the end of steam traction in the DR, approximately 1988
Wheel arrangement 2-10-0
Axle arrangement 1′E h2
Type G 56.15
Track gauge 1,435 mm (4 ft 8 12 in)
Length over buffers 22.975 m (75 ft 4 12 in)
Overall wheelbase 9.2 m (30 ft 2 14 in)
Wheelbase incl. tender 19 m (62 ft 4 in)
Service weight 89.7 t (88.3 long tons; 98.9 short tons)
Adhesive weight 79.6 t (78.3 long tons; 87.7 short tons)
Top speed
  • forwards: 80 km/h (50 mph)
  • backwards: 50 km/h (31 mph)
Indicated Power 1,470 kW (2,000 PS; 1,970 hp)
Driving wheel diameter 1,400 mm (4 ft 7 18 in)
Leading wheel diameter 850 mm (2 ft 9 12 in)
Cylinder bore 600 mm (23 58 in)
Piston stroke 660 mm (26 in)
Boiler Overpressure 16 bar (1.60 MPa; 232 psi)
No. of heating tubes 124
No. of smoke tubes 38
Heating tube length 4,700 mm (15 ft 5 in)
Grate area 3.71 m2 (39.9 sq ft)
Radiative heating area 17.9 m2 (193 sq ft)
Tube heating area 154.5 m2 (1,663 sq ft)
Superheater area 64.5 m2 (694 sq ft)
Evaporative heating area 172.3 m2 (1,855 sq ft)
Tender service weight 18.5 t (18.2 long tons; 20.4 short tons)
Water capacity 30 m3 (1,100 cu ft) or 30,000 l (6,600 imp gal; 7,900 US gal)
Fuel 10 t (9.8 long tons; 11 short tons) coal
Brakes Knorr
Train heating Steam

The Rekolokomotives of DR Class 52.80 first appeared in 1960 in service with the Deutsche Reichsbahn in East Germany as extensive rebuilds of the wartime locomotives or Kriegslokomotiven of DRB Class 52. This modernisation, described as 'reconstruction' (Rekonstruktion, hence Rekolokomotive), extended to almost all of the components and systems on the engine.


This reconstruction should not to be confused with the general repair of a number of locomotives which was also carried out in the Stendal Reichsbahn repair shop (Reichsbahnausbesserungswerk or RAW) from 1959 onwards. Under that programme only the refinements omitted during wartime were added back, and worn out components - or those which were too small (again for wartime austerity reasons) - were replaced. Usually only the firebox and pony trucks were replaced. These refurbished engines retained their original numbers, however the Rekoloks were reorganised, irrespective of their original numbers, into sub-class 52.80.

For economic reasons the general repair programme was cut back, nevertheless in early summer 1960 work began on the reconstruction of Class 52 at RAW Stendal. Up to 1967, 200 locomotives were rebuilt with a slightly modified, Typ 50E, combustion-chambered boiler, originally designed for the Class 50.35. Other notable features of the Rekolok were new, welded cylinders, an IfS/DR mixer-preheater system and a new driver's cab front walls with oval windows, mainly on account of the new boiler. The intention to replace the entire the cab and provide the engines with new tenders did not come about. The worn out Class 2'2'T30 tub tenders were mainly given new tubs.

Other reconstruction measures included the installation of axle box tightening wedges and the replacement of the Krauss-Helmholtz bogies. Despite often expressed views to the contrary, the valves were not replaced or rebuilt as part of the reconstruction. The 52.80 had standard piston valves with Winterthur pressure equalisation and hence poor riding qualities when running light. Not until the 1980s were Trofimoff valves and cylinder safety valves installed on some locomotives at RAW Meiningen. This improved the riding performance hugely when the engines ran without a train, something which was also noticeable in terms of savings in lubricants and fuel.

Some locomotives were also fitted with Giesl-Gieslingen suction draught systems, the so-called Giesl ejectors. However, for licensing reasons, these were removed once they had worn out or become defective.

Surviving locomotives

Of the originally 200 locomotives reconstructed, a large number are still in existence in the hands of various owners in varying condition (see List of preserved steam locomotives in Germany). At present (August 2007) ten working examples are known of. Number 52 8055 was extensively rebuilt, using advanced steam technology, oil firing and roller bearings for both axles and drive by the Swiss company Dampflokomotiv- und Maschinenfabrik DLM AG in 1998.[1] Since 2003 it is owned by its rebuilder DLM AG and based in Schaffhausen, Switzerland. Being equipped with automatic trainstop of both Signum and ETCS-LS type it is fully certified for operation on the Swiss normal gauge network.


See also


  1. ^ Waller, Roger M. (July 2004). "Die Modernisierung der Dampflokomotive 52 8055". Eisenbahn-Revue International (in German). Heft: 301–305. ISSN 1421-2811.
  • Reimer, Michael; Endisch, Dirk. Baureihe 52.80 - Die rekonstruierte Kriegslokomotive. GeraMond. ISBN 3-7654-7101-1.

External links

  • Photos, data and information about DR Class 52.80s (German)
Retrieved from "https://en.wikipedia.org/w/index.php?title=DR_Class_52.80&oldid=854310678"
This content was retrieved from Wikipedia : http://en.wikipedia.org/wiki/DR_Class_52.80
This page is based on the copyrighted Wikipedia article "DR Class 52.80"; it is used under the Creative Commons Attribution-ShareAlike 3.0 Unported License (CC-BY-SA). You may redistribute it, verbatim or modified, providing that you comply with the terms of the CC-BY-SA