Bremsstrahlung
Bremsstrahlung (German pronunciation: [ˈbʁɛmsˌʃtʁaːlʊŋ] ( listen)), from bremsen "to brake" and Strahlung "radiation"; i.e., "braking radiation" or "deceleration radiation", is electromagnetic radiation produced by the deceleration of a charged particle when deflected by another charged particle, typically an electron by an atomic nucleus. The moving particle loses kinetic energy, which is converted into radiation (i.e., a photon), thus satisfying the law of conservation of energy. The term is also used to refer to the process of producing the radiation. Bremsstrahlung has a continuous spectrum, which becomes more intense and whose peak intensity shifts toward higher frequencies as the change of the energy of the decelerated particles increases.
Broadly speaking, bremsstrahlung or braking radiation is any radiation produced due to the deceleration (negative acceleration) of a charged particle, which includes synchrotron radiation (i.e. photon emission by a relativistic particle), cyclotron radiation (i.e. photon emission by a non-relativistic particle), and the emission of electrons and positrons during beta decay. However, the term is frequently used in the more narrow sense of radiation from electrons (from whatever source) slowing in matter.
Bremsstrahlung emitted from plasma is sometimes referred to as free/free radiation. This refers to the fact that the radiation in this case is created by charged particles that are free; i.e., not part of an ion, atom or molecule, both before and after the deflection (acceleration) that caused the emission.
Contents
Particle in vacuum
A charged particle accelerating in a vacuum radiates power, as described by the Larmor formula and its relativistic generalizations. Although the term, bremsstrahlung, is usually reserved for charged particles accelerating in matter, not vacuum, the formulas are similar.^{[citation needed]} (In this respect, bremsstrahlung differs from Cherenkov radiation, another kind of braking radiation which occurs only in matter, and not in a vacuum.)
Total radiated power
The most established relativistic formula for total radiated power is given by^{[1]}
where (the velocity of the particle divided by the speed of light), is the Lorentz factor, signifies a time derivative of , and q is the charge of the particle. This is commonly written in the mathematically equivalent form ^{[2]} using :
In the case where velocity is parallel to acceleration (for example, linear motion), the formula simplifies to^{[3]}
where is the acceleration. For the case of acceleration perpendicular to the velocity (a case that arises in circular particle accelerators known as synchrotrons), the total power radiated reduces to
radiated in the two limiting cases is proportional to or . Since , we see that the total radiated power goes as or , which accounts for why electrons lose energy to bremsstrahlung radiation much more rapidly than heavier charged particles (e.g., muons, protons, alpha particles). This is the reason a TeV energy electron-positron collider (such as the proposed International Linear Collider) cannot use a circular tunnel (requiring constant acceleration), while a proton-proton collider (such as the Large Hadron Collider) can utilize a circular tunnel. The electrons lose energy due to bremsstrahlung at a rate times higher than protons do.
Angular distribution
The most general formula for radiated power as a function of angle is:^{[2]}
where is a unit vector pointing from the particle towards the observer, and is an infinitesimal bit of solid angle.
In the case where velocity is parallel to acceleration (for example, linear motion), this simplifies to^{[2]}
where is the angle between and the direction of observation.
Thermal bremsstrahlung
NOTE: this article currently gives formulas that apply in the Rayleigh-Jeans limit , and does not use a quantized (Planck) treatment of radiation. Thus a usual factor like does not appear. The appearance of in y below is due to the quantum-mechanical treatment of collisions.
In a plasma, the free electrons continually collide with the ions, producing bremsstrahlung. A complete analysis requires accounting for both binary Coulomb collisions as well as collective (dielectric) behavior. A detailed treatment is given by Bekefi,^{[4]} while a simplified one is given by Ichimaru.^{[5]} In this section we follow Bekefi's dielectric treatment, with collisions included approximately via the cutoff wavenumber, .
Consider a uniform plasma, with thermal electrons distributed according to the Maxwell–Boltzmann distribution with the temperature . Following Bekefi, the power spectral density (power per angular frequency interval per volume, integrated over the whole sr of solid angle, and in both polarizations) of the bremsstrahlung radiated, is calculated to be
where is the electron plasma frequency, is the photon frequency, is the number density of electrons and ions, and other symbols are physical constants. The second bracketed factor is the index of refraction of a light wave in a plasma, and shows that emission is greatly suppressed for (this is the cutoff condition for a light wave in a plasma; in this case the light wave is evanescent). This formula thus only applies for . This formula should be summed over ion species in a multi-species plasma.
The special function is defined in the exponential integral article, and the unitless quantity is
is a maximum or cutoff wavenumber, arising due to binary collisions, and can vary with ion species. Roughly, when (typical in plasmas that are not too cold), where eV is the Hartree energy, and ^{[clarification needed]} is the electron thermal de Broglie wavelength. Otherwise, where is the classical Coulomb distance of closest approach.
For the usual case , we find
The formula for is approximate, in that it neglects enhanced emission occurring for slightly above .
In the limit , we can approximate E1 as where is the Euler–Mascheroni constant. The leading, logarithmic term is frequently used, and resembles the Coulomb logarithm that occurs in other collisional plasma calculations. For the log term is negative, and the approximation is clearly inadequate. Bekefi gives corrected expressions for the logarithmic term that match detailed binary-collision calculations.
The total emission power density, integrated over all frequencies, is
- and decreases with ; it is always positive. For , we find
Note the appearance of due to the quantum nature of . In practical units, a commonly used version of this formula for is ^{[6]}
This formula is 1.59 times the one given above, with the difference due to details of binary collisions. Such ambiguity is often expressed by introducing Gaunt factor , e.g. in ^{[7]} one finds
where everything is expressed in the CGS units.
Relativistic corrections
For very high temperatures there are relativistic corrections to this formula, that is, additional terms of the order of ^{[8]}
Bremsstrahlung cooling
If the plasma is optically thin, the bremsstrahlung radiation leaves the plasma, carrying part of the internal plasma energy. This effect is known as the bremsstrahlung cooling. It is a type of radiative cooling. The energy carried away by bremsstrahlung is called bremsstrahlung losses and represents a type of radiative losses. One generally uses the term bremsstrahlung losses in the context when the plasma cooling is undesired, as e.g. in fusion plasmas.
Polarizational bremsstrahlung
Polarizational bremsstrahlung (sometimes referred to as "atomic bremsstrahlung") is the radiation emitted by the target's atomic electrons as the target atom is polarized by the Coulomb field of the incident charged particle.^{[9]}^{[10]} Polarizational bremsstrahlung contributions to the total bremsstrahlung spectrum have been observed in experiments involving relatively massive incident particles,^{[11]} resonance processes,^{[12]} and free atoms.^{[13]} However, there is still some debate as to whether or not there are significant polarizational bremsstrahlung contributions in experiments involving fast electrons incident on solid targets.^{[14]}^{[15]}
It is worth noting that the term "polarizational" is not meant to imply that the emitted bremsstrahlung is polarized. Also, the angular distribution of polarizational bremsstrahlung is theoretically quite different than ordinary bremsstrahlung.^{[16]}
Sources of bremsstrahlung
X-ray tube
In an X-ray tube, electrons are accelerated in a vacuum by an electric field towards a piece of metal called the "target." X-rays are emitted as the electrons slow down (decelerate) in the metal. The output spectrum consists of a continuous spectrum of X-rays, with additional sharp peaks at certain energies. The continuous spectrum is due to bremsstrahlung, while the sharp peaks are characteristic X-rays associated with the atoms in the target. For this reason, bremsstrahlung in this context is also called continuous X-rays.^{[17]}
The shape of this continuum spectrum is approximately described by Kramers' law.
The formula for Kramers' law is usually given as the distribution of intensity (photon count) against the wavelength of the emitted radiation:^{[18]}
The constant K is proportional to the atomic number of the target element, and is the minimum wavelength given by the Duane–Hunt law.
The spectrum has a sharp cutoff at , which is due to the limited energy of the incoming electrons. For example, if an electron in the tube is accelerated through 60 kV, then it will acquire a kinetic energy of 60 keV, and when it strikes the target it can create X-rays with energy of at most 60 keV, by conservation of energy. (This upper limit corresponds to the electron coming to a stop by emitting just one X-ray photon. Usually the electron emits many photons, and each has an energy less than 60 keV.) A photon with energy of at most 60 keV has wavelength of at least 21 pm, so the continuous X-ray spectrum has exactly that cutoff, as seen in the graph. More generally the formula for the low-wavelength cutoff, the Duane-Hunt law, is:^{[19]}
where h is Planck's constant, c is the speed of light, V is the voltage that the electrons are accelerated through, e is the elementary charge, and pm is picometres.
Beta decay
Beta particle-emitting substances sometimes exhibit a weak radiation with continuous spectrum that is due to bremsstrahlung (see the "outer bremsstrahlung" below). In this context, bremsstrahlung is a type of "secondary radiation", in that it is produced as a result of stopping (or slowing) the primary radiation (beta particles). It is very similar to X-rays produced by bombarding metal targets with electrons in X-ray generators (as above) except that it is produced by high-speed electrons from beta radiation.
Inner and outer bremsstrahlung
The "inner" bremsstrahlung (also known as "internal bremsstrahlung") arises from the creation of the electron and its loss of energy (due to the strong electric field in the region of the nucleus undergoing decay) as it leaves the nucleus. Such radiation is a feature of beta decay in nuclei, but it is occasionally (less commonly) seen in the beta decay of free neutrons to protons, where it is created as the beta electron leaves the proton.
In electron and positron emission by beta decay the photon's energy comes from the electron-nucleon pair, with the spectrum of the bremsstrahlung decreasing continuously with increasing energy of the beta particle. In electron capture, the energy comes at the expense of the neutrino, and the spectrum is greatest at about one third of the normal neutrino energy, decreasing to zero electromagnetic energy at normal neutrino energy. Note that in the case of electron capture, bremsstrahlung is emitted even though no charged particle is emitted. Instead, the bremsstrahlung radiation may be thought of as being created as the captured electron is accelerated toward being absorbed. Such radiation may be at frequencies that are the same as soft gamma radiation, but it exhibits none of the sharp spectral lines of gamma decay, and thus is not technically gamma radiation.
The internal process is to be contrasted with the "outer" bremsstrahlung due to the impingement on the nucleus of electrons coming from the outside (i.e., emitted by another nucleus), as discussed above.^{[20]}
Radiation safety
In some cases, e.g. ^{32}
_{}P, the bremsstrahlung produced by shielding the beta radiation with the normally used dense materials (e.g. lead) is itself dangerous; in such cases, shielding must be accomplished with low density materials, e.g. Plexiglas (Lucite), plastic, wood, or water;^{[21]} as the atomic number is lower for these materials, the intensity of bremsstrahlung is significantly reduced, but a larger thickness of shielding is required to stop the electrons (beta radiation).
In astrophysics
The dominant luminous component in a cluster of galaxies is the 10^{7} to 10^{8} kelvin intracluster medium. The emission from the intracluster medium is characterized by thermal bremsstrahlung. This radiation is in the energy range of X-rays and can be easily observed with space-based telescopes such as Chandra X-ray Observatory, XMM-Newton, ROSAT, ASCA, EXOSAT, Suzaku, RHESSI and future missions like IXO [3] and Astro-H [4].
Bremsstrahlung is also the dominant emission mechanism for H II regions at radio wavelengths.
In electric discharges
In electric discharges, for example as laboratory discharges between two electrodes or as lightning discharges between cloud and ground or within clouds, electrons produce Bremsstrahlung photons while scattering off air molecules. These photons become manifest in terrestrial gamma-ray flashes and are the source for beams of electrons, positrons, neutrons and protons.^{[22]} The appearance of Bremsstrahlung photons also influences the propagation and morphology of discharges in nitrogen-oxygen mixtures with low percentages of oxygen.^{[23]}
Quantum mechanical description
The complete quantum mechanical description was first performed by Bethe and Heitler.^{[24]} They assumed plane waves for electrons which scatter at the nucleus of an atom, and derived a cross section which relates the complete geometry of that process to the frequency of the emitted photon. The quadruply differential cross section which shows a quantum mechanical symmetry to pair production, is:
There is the atomic number, the fine structure constant, the reduced Planck's constant and the speed of light. The kinetic energy of the electron in the initial and final state is connected to its total energy or its momenta via
where is the mass of an electron. Conservation of energy gives
where is the photon energy. The directions of the emitted photon and the scattered electron are given by
where is the momentum of the photon.
The differentials are given as
The absolute value of the virtual photon between the nucleus and electron is
The range of validity is given by the Born approximation
where this relation has to be fulfilled for the velocity of the electron in the initial and final state.
For practical applications (e.g. in Monte Carlo codes) it can be interesting to focus on the relation between the frequency of the emitted photon and the angle between this photon and the incident electron. Köhn and Ebert ^{[25]} integrated the quadruply differential cross section by Bethe and Heitler over and and obtained:
with
and
However, a much simpler expression for the same integral can be found in ^{[26]} (Eq. 2BN) and in ^{[27]} (Eq. 4.1).
An analysis of the doubly differential cross section above shows that electrons whose kinetic energy is larger than the rest energy (511 keV) emit photons in forward direction while electrons with a small energy emit photons isotropically.
Electron–electron bremsstrahlung
One mechanism, considered important for small atomic numbers , is the scattering of a free electron at the shell electrons of an atom or molecule.^{[28]} Since electron–electron bremsstrahlung is a function of and the usual electron-nucleus bremsstrahlung is a function of , electron–electron bremsstrahlung is negligible for metals. For air, however, it plays an important role in the production of terrestrial gamma-ray flashes.^{[29]}
See also
- Cyclotron radiation
- Free-electron laser
- Nuclear fusion: bremsstrahlung losses
- Radiation length characterising energy loss by bremsstrahlung by high energy electrons in matter
- Synchrotron light source
- X-rays: History
- List of plasma (physics) articles
References
- ^ A Plasma Formulary for Physics, Technology, and Astrophysics, D. Diver, pp. 46–48.
- ^ ^{a} ^{b} ^{c} Jackson, Classical Electrodynamics, Sections 14.2–3
- ^ Introduction to Electrodynamics, D. J. Griffiths, pp. 463–465
- ^ Radiation Processes in Plasmas, G. Bekefi, Wiley, 1st edition (1966)
- ^ Basic Principles of Plasmas Physics: A Statistical Approach, S. Ichimaru, p. 228.
- ^ NRL Plasma Formulary, 2006 Revision, p. 58.
- ^ Radiative Processes in Astrophysics, G.B. Rybicki & A.P. Lightman, p. 162.
- ^ Fundamental limitations on plasma fusion systems not in thermodynamic equilibrium, by T.H. Rider, 1995, page 25 MIT PhD thesis
- ^ Polarization Bremsstrahlung on Atoms, Plasmas, Nanostructures and Solids, by V. Astapenko
- ^ New Developments in Photon and Materials Research, Chapter 3: "Polarizational Bremsstrahlung: A Review", by S. Williams
- ^ Ishii, K. Radiat. Phys. Chem. 2006, 75, 1135–1163.
- ^ Wendin, G.; Nuroh, K. Phys. Rev. Lett. 1977, 39, 48–51.
- ^ Portillo, S.; Quarles, C.A. Phys. Rev. Lett. 2003, 91, 173201.
- ^ Astapenko, V.A.; Kubankin, K.S.; Nasonov, N.N.; Polyanskiĭ, V.V.; Pokhil, G.P.; Sergienko, V.I.; Khablo, V.A. JETP Lett. 2006, 84, 281–284.
- ^ Williams, S.; Quarles, C.A. Phys. Rev. A 2008, 78, 062704.
- ^ Gonzales, D.; Cavness, B.; Williams, S. Phys. Rev. A 2011, 84, 052726.
- ^ Electron microprobe analysis and scanning electron microscopy in geology, by S. J. B. Reed, 2005, page 12 Google books link
- ^ Laguitton, Daniel; William Parrish (1977). "Experimental Spectral Distribution versus Kramers' Law for Quantitative X-ray Fluorescence by the Fundamental Parameters Method". X-Ray Spectrometry. 6 (4): 201. Bibcode:1977XRS.....6..201L. doi:10.1002/xrs.1300060409.
- ^ Handbook of X-ray spectrometry by René Grieken, Andrzej Markowicz, page 3, Google books link
- ^ Knipp, J.K.; G.E. Uhlenbeck (June 1936). "Emission of gamma radiation during the beta decay of nuclei". Physica. 3 (6): 425–439. Bibcode:1936Phy.....3..425K. doi:10.1016/S0031-8914(36)80008-1. ISSN 0031-8914. Retrieved 12 May 2010.
- ^ https://ehs.umich.edu/wp-content/uploads/sites/37/2016/04/Phosphorus-32.pdf
- ^ Köhn, C., Ebert, U. Calculation of beams of positrons, neutrons, and protons associated with terrestrial gamma ray flashes Journal Geophys. Res. (2015), vol. 120, pp. 1620--1635 ([1])
- ^ Köhn, C., Chanrion, O., Neubert, T. The influence of bremsstrahlung on electric discharge streamers in N_{2}, O_{2} gas mixtures Plasma Sources Sci. Technol. (2017), vol. 26, 015006 ([2])
- ^ Bethe, H.A., Heitler, W., 1934. On the stopping of fast particles and on the creation of positive electrons. Proc. Phys. Soc. Lond. 146, 83–112
- ^ Köhn, C., Ebert, U., Angular distribution of bremsstrahlung photons and of positrons for calculations of terrestrial gamma-ray flashes and positron beams, Atmos. Res. (2014), vol. 135–136, pp. 432–465
- ^ H. W. Koch, J. W. Motz, Bremsstrahlung Cross-Section Formulas and Related Data; Rev. Mod. Phys. 31, 920
- ^ R. L. Gluckstern and M. H. Hull, Jr., Polarization Dependence of the Integrated Bremsstrahlung Cross Section; Phys. Rev. 90, 1030
- ^ Tessier F and Kawrakow I (2007) Calculation of the electron-electron bremsstrahlung crosssection in the field of atomic electrons, NIM. Phys. Res. B 266 625–634
- ^ Köhn, C., Ebert, U. The importance of electron-electron bremsstrahlung for terrestrial gamma-ray flashes, electron beams and electron-positron beams J. Phys. D.: Appl. Phys. as Fast Track Communication (2014), vol. 47, 252001
Further reading
- Eberhard Haug & Werner Nakel (2004). The elementary process of bremsstrahlung. River Edge NJ: World Scientific. p. Scientific lecture notes in physics, vol. 73. ISBN 978-981-238-578-9.
External links
Look up bremsstrahlung in Wiktionary, the free dictionary. |
- Index of Early Bremsstrahlung Articles