BepiColombo

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search
BepiColombo
Mercury Planetary Orbiter and Mercury Magnetospheric Orbiter
Artist's depiction of the BepiColombo mission, with the Mercury Planetary Orbiter (left) and Mercury Magnetospheric Orbiter (right)
Mission type Planetary science
Operator ESA · JAXA
COSPAR ID 2018-080A
SATCAT no. 43653
Website sci.esa.int/bepicolombo/
global.jaxa.jp/projects/sat/bepi/
Mission duration Cruise: 7 years
Science phase: 1 year
Spacecraft properties
Manufacturer Airbus · ISAS
Launch mass 4,100 kg (9,040 lb)[1]
BOL mass MPO: 1,230 kg (2,710 lb)[1]
Mio: 255 kg (560 lb)[1]
Dry mass 2,700 kg (5,950 lb)[1]
Dimensions MPO: 2.4 × 2.2 × 1.7 m[1]
     (7.9 × 7.2 × 5.6 ft)
Mio: 1.8 × 1.1 m[1]
     (5.9 × 3.6 ft)
Power MPO: 150 W
Mio: 90 W
Start of mission
Launch date 20 October 2018 (2018-10-20), 01:45 UTC
Rocket Ariane 5 ECA (VA245)[2]
Launch site Guiana Space Centre[3]
Contractor Arianespace
Mercury orbiter
Spacecraft component Mercury Planetary Orbiter
(MPO)
Orbital insertion Planned: 5 December 2025
Orbit parameters
Perihermion 480 km (300 mi)
Apohermion 1,500 km (930 mi)
Inclination 90°
Mercury orbiter
Spacecraft component Mercury Magnetospheric Orbiter
(MMO)
Orbital insertion Planned: 5 December 2025
Orbit parameters
Perihermion 590 km (370 mi)
Apohermion 11,640 km (7,230 mi)
Inclination 90°
BepiColombo mission insignia
ESA solar system insignia for BepiColombo

BepiColombo is a joint mission of the European Space Agency (ESA) and the Japan Aerospace Exploration Agency (JAXA) to the planet Mercury.[4] The mission comprises two satellites launched together: the Mercury Planetary Orbiter (MPO) and Mio (Mercury Magnetospheric Orbiter, MMO).[5] The mission will perform a comprehensive study of Mercury, including characterization of its magnetic field, magnetosphere, and both interior and surface structure. It was launched on an Ariane 5[2] rocket on 20 October 2018 at 01:45 UTC, with an arrival at Mercury planned for December 2025, after a flyby of Earth, two flybys of Venus, and six flybys of Mercury.[1][6] The mission was approved in November 2009, after years in proposal and planning as part of the European Space Agency's Horizon 2000+ programme;[7] it is the last mission of the programme to be launched.[8]

Mission

BepiColombo is named after Giuseppe "Bepi" Colombo (1920–1984), a scientist, mathematician and engineer at the University of Padua, Italy, who first implemented the interplanetary gravity-assist manoeuvre during the 1974 Mariner 10 mission, a technique now commonly used by planetary probes.

The mission involves three components, which will separate into independent spacecraft upon arrival at Mercury.[9]

  • Mercury Transfer Module (MTM) for propulsion, built by ESA
  • Mercury Planetary Orbiter (MPO) built by ESA
  • Mercury Magnetospheric Orbiter (MMO) or Mio built by JAXA

During launch and cruise phase, these three components are joined together to form the Mercury Cruise System (MCS).

The prime contractor for ESA is Airbus Defence and Space.[10] ESA is responsible for the overall mission, the design, development assembly and test of the propulsion and MPO modules, and the launch. The two orbiters were successfully launched together on 20 October 2018[11], on Ariane flight VA245. The spacecraft will have a seven-year interplanetary cruise to Mercury using solar-electric propulsion (ion thrusters) and gravity assists from Earth, Venus and eventual gravity capture at Mercury.[1] ESA's Cebreros 35-metre ground station is planned to be the primary ground facility for communications during all mission phases.

Arriving in Mercury orbit on 5 December 2025, the Mio and MPO satellites will separate and observe Mercury in collaboration for one year, with a possible one-year extension.[1] The orbiters are equipped with scientific instruments provided by various European countries and Japan. The mission will characterize the solid and liquid iron core (​34 of the planet's radius) and determine the size of each.[12] The mission will also complete gravitational and magnetic field mappings. Russia provided gamma ray and neutron spectrometers to verify the existence of water ice in polar craters that are permanently in shadow from the Sun's rays.

Mercury is too small and hot for its gravity to retain any significant atmosphere over long periods of time, but it has a "tenuous surface-bounded exosphere"[13] containing hydrogen, helium, oxygen, sodium, calcium, potassium and other trace elements. Its exosphere is not stable as atoms are continuously lost and replenished from a variety of sources. The mission will study the exosphere composition and dynamics, including generation and escape.

Objectives

The main objectives of the mission are:[3][14]

Design

Planned orbits for Mio and MPO satellites, the two probes of the BepiColombo mission

The stacked spacecraft will take seven years to position itself to enter Mercury orbit. During this time it will use solar-electric propulsion and nine gravity assists, flying past the Earth and Moon in April 2020, Venus in 2020 and 2021, and six Mercury flybys between 2021 and 2025.[1]

The stacked spacecraft left Earth with a hyperbolic excess velocity of 3.475 km/s (2.159 mi/s). Initially the craft is placed in an orbit similar to that of the Earth. After both the spacecraft and the Earth completed one and a half orbits, it returns to Earth to perform a gravity-assist manoeuvre and is deflected towards Venus. Two consecutive Venus flybys reduce the perihelion nearly to Mercury distance with almost no need for thrust. A sequence of six Mercury flybys will lower the relative velocity to 1.76 km/s (1.09 mi/s). After the fourth Mercury flyby the craft will be in an orbit similar to that of Mercury and will remain in the general vicinity of Mercury (see video). Four final thrust arcs reduce the relative velocity to the point where Mercury will "weakly" capture the spacecraft on 5 December 2025 into polar orbit. Only a small manoeuvre is needed to bring the craft into an orbit around Mercury with an apocentre of 178,000 km. The orbiters then separate and will adjust their orbits using chemical thrusters.[17][18]

Schedule

Animation of BepiColombo's trajectory from 20 October 2018 to 2 November 2025
   BepiColombo ·   Earth ·   Venus ·   Mercury ·   Sun
For more detailed animation, See this video.

As of 2018, the planned mission schedule is:[1]

Date Event Comment
20 October 2018 Launch
6 April 2020 Earth flyby 1.5 years after launch
12 October 2020 First Venus flyby
11 August 2021 Second Venus flyby 1.35 Venus years after first Venus flyby
2 October 2021 First Mercury flyby
23 June 2022 Second Mercury flyby 2 orbits (3.00 Mercury years) after 1st Mercury flyby
20 June 2023 Third Mercury flyby >3 orbits (4.12 Mercury years) after 2nd Mercury flyby
5 September 2024 Fourth Mercury flyby ~4 orbits (5.04 Mercury years) after 3rd Mercury flyby
2 December 2024 Fifth Mercury flyby 1 orbit (1.00 Mercury year) after 4th Mercury flyby
9 January 2025 Sixth Mercury flyby ~0.43 orbits (0.43 Mercury years) after 5th Mercury flyby
5 December 2025 Mercury orbit insertion Spacecraft separation; 3.75 Mercury years after 6th Mercury flyby
14 March 2026 MPO in final science orbit 1.13 Mercury years after orbit insertion
1 May 2027 End of nominal mission 5.82 Mercury years after orbit insertion
1 May 2028 End of extended mission 9.98 Mercury years after orbit insertion
Timeline of BepiColombo from 20 October 2018 to 2 November 2025. Red circle indicates flybys.

History

The BepiColombo mission proposal was approved in 2000 by the ESA, with a science payload proposal request issued in 2004.[19] In 2007, Astrium was selected as the prime contractor, and the Soyuz-Fregat launcher was dropped in favor of Ariane 5 as the estimated mass increased.[19] The initial target launch of July 2014 was postponed several times, mostly because of delays on the development of the solar electric propulsion.[19] The total cost of the mission is estimated at USD$2 billion.[20]

Components

Mercury Transfer Module

Mercury Transfer Module in The Large Space Simulator at ESTEC.
QinetiQ T6 Performance[21][22]
Type Kaufman Ion Engine
Units on board 4 [23][24]
Diameter 22 centimetres (8.7 in)
Max. thrust 145 mN each
Specific impulse
(Isp)
4,300 s
Propellant Xenon
Total power 4,628 W

The Mercury Transfer Module (MTM) is located at the base of the stack. Its role is to carry the two science orbiters to Mercury and to support them during the cruise.

The MTM is equipped with a solar electric propulsion system as the main spacecraft propulsion. Its four QinetiQ T6 ion thrusters operate singly or in pair for a maximum combined thrust of 290 mN,[25] making it the most powerful ion engine ever operated in space. The MTM supplies electrical power for the two hibernating orbiters as well as for its solar electric propulsion system thanks to two 14-meter-long solar panels.[26] Depending on the probe's distance to the Sun, the generated power will range between 7 and 14 kW, each T6 requiring between 2.5 and 4.5 kW according to the desired thrust level.

The solar electric propulsion system has typically very high specific impulse and low thrust. This leads to a flight profile with months-long continuous low-thrust braking phases, interrupted by planetary gravity assists, to gradually reduce the velocity of the spacecraft. Moments before Mercury orbit insertion, the MTM will be jettisoned from the spacecraft stack.[26] After separation from the MTM, the MPO will provide Mio all necessary power and data resources until Mio is delivered to its mission orbit; separation of Mio from MPO will be accomplished by spin-ejection.

Mercury Planetary Orbiter

Mercury Planetary Orbiter in ESTEC before stacking
Radio testing of BepiColombo orbiter

The Mercury Planetary Orbiter (MPO) will have a mass of 1,150 kg (2,540 lb) and will use a single-sided solar array capable of providing up to 1000 watts and featuring Optical Solar Reflectors to keep its temperature below 200 °C (392 °F). The solar array requires continuous rotation keeping the Sun at a low incidence angle in order to generate adequate power while at the same time limiting the temperature.[26]

The MPO will carry a payload of 11 instruments, comprising cameras, spectrometers (IR, UV, X-ray, γ-ray, neutron), a radiometer, a laser altimeter, a magnetometer, particle analysers, a Ka-band transponder, and an accelerometer. The payload components are mounted on the nadir side of the spacecraft to achieve low detector temperatures, apart from the MERTIS and PHEBUS spectrometers located directly at the main radiator to provide a better field of view.[26]

A high-temperature-resistant 1.0 m (3.3 ft) diameter high-gain antenna is mounted on a short boom on the zenith side of the spacecraft. Communications will be on the X and Ka band with an average bit rate of 50 kbit/s and a total data volume of 1550 Gbit/year. ESA's Cebreros 35-metre ground station is planned to be the primary ground facility for communications during all mission phases.[26]

Science payload

The science payload of the Mercury Planetary Orbiter consists of eleven instruments:[27][28]

Mio (Mercury Magnetospheric Orbiter)

Mio in ESTEC before stacking

Mio, or the Mercury Magnetospheric Orbiter (MMO), developed and built mostly by Japan, has the shape of a short octagonal prism, 180 cm (71 in) long from face to face and 90 cm (35 in) high.[3][31] It has a mass of 285 kg (628 lb), including a 45 kg (99 lb) scientific payload consisting of 5 instrument groups, 4 for plasma and dust measuring run by investigators from Japan, and one magnetometer from Austria.[3][32][33]

Mio is spin stabilized at 15 rpm with the spin axis perpendicular to the equator of Mercury and it will enter polar orbit at an altitude of 590 × 11,640 km (370 × 7,230 mi), outside of MPO's orbit.[32] The top and bottom of the octagon act as radiators with louvers for active temperature control. The sides are covered with solar cells which provide 90 W. Communications with Earth will be through a 0.8 m (2.6 ft) diameter X band phased array high-gain antenna and two medium-gain antennas operating in the X band. Telemetry will return 160 Gb/year, about 5 kbit/s over the lifetime of the spacecraft, which is expected to be greater than one year. The reaction and control system is based on cold gas thrusters. After its release in Mercury orbit, Mio will be operated by Sagamihara Space Operation Center using Usuda Deep Space Center's 64 m (210 ft) antenna located in Nagano, Japan.[27]

The Mercury Magnetospheric Orbiter was given the nickname Mio on 8 June 2018. In Japanese, Mio means a waterway for ships, and symbolizes the research and development milestones reached thus far, as well as wishes for a safe travel ahead. The spacecraft will explore the solar wind as it flows through and is interfered by Mercury's magnetosphere, just like a ship voyaging through water currents. Mio was chosen from among 6,494 submissions from the public.[5]

Science payload

Mio carries five groups of science instruments with a total mass of 45 kg (99 lb):[3][27]

  • Mercury Plasma Particle Experiment (MPPE), studies the plasma & neutral particles from the planet, magnetosphere, and interplanetary solar wind. It will employ these instruments:
    • Mercury Electron Analyzers (MEA1 and MEA2)
    • Mercury Ion Analyzer (MIA)
    • Mass Spectrum Analyzer (MSA)
    • High-Energy Particle instrument for electrons (HEP-ele)
    • High-Energy Particle instrument for Ions (HEP-ion)
    • Energetic Neutrals Analyzer (ENA)
  • Mercury Magnetometer (MMO-MGF), studies Mercury's magnetic field, magnetosphere, and interplanetary solar wind
  • Plasma Wave Investigation (PWI), studies the electric field, electromagnetic waves, and radio waves from the magnetosphere and solar wind
  • Mercury Sodium Atmosphere Spectral Imager (MSASI), studies the thin sodium atmosphere of Mercury
  • Mercury Dust Monitor (MDM), studies dust from the planet and interplanetary space

Mercury Surface Element (cancelled)

The Mercury Surface Element (MSE) was cancelled in 2003 due to budgetary constraints.[8] At the time of cancellation, MSE was meant to be a small, 44 kg (97 lb), lander designed to operate for about one week on the surface of Mercury.[17] Shaped as a 0.9 m (3.0 ft) diameter disc, it was designed to land at a latitude of 85° near the terminator region. Braking manoeuvres would bring the lander to zero velocity at an altitude of 120 m (390 ft) at which point the propulsion unit would be ejected, the airbags inflated, and the module would fall to the surface with a maximum impact velocity of 30 m/s (98 ft/s). Scientific data would be stored onboard and relayed via a cross-dipole UHF antenna to either the MPO or Mio. The MSE would have carried a 7 kg (15 lb) payload consisting of an imaging system (a descent camera and a surface camera), a heat flow and physical properties package, an alpha particle X-ray spectrometer, a magnetometer, a seismometer, a soil penetrating device (mole), and a micro-rover.[34]

See also

References

  1. ^ a b c d e f g h i j k "BepiColombo Factsheet". European Space Agency. 6 July 2017. Retrieved 6 July 2017.
  2. ^ a b "BepiColombo's first image from space". esa.int. 2018-10-10.
  3. ^ a b c d e "MIO/BepiColombo". JAXA. 2018. Retrieved 9 July 2018.
  4. ^ Amos, Jonathan (18 January 2008). "European probe aims for Mercury". BBC News. Retrieved 21 January 2008.
  5. ^ a b "MIO - Mercury Magnetospheric Orbiter's New Name" (Press release). JAXA. 8 June 2018. Retrieved 9 June 2018.
  6. ^ "BepiColombo Launch Rescheduled for October 2018". European Space Agency. 25 November 2016. Retrieved 14 December 2016.
  7. ^ "BepiColombo Overview". European Space Agency. 5 September 2016. Retrieved 13 March 2017.
  8. ^ a b "Critical Decisions on Cosmic Vision" (Press release). European Space Agency. 7 November 2003. No. 75-2003. Retrieved 14 December 2016.
  9. ^ Hayakawa, Hajime; Maejima, Hironori (2011). BepiColombo Mercury Magnetospheric Orbiter (MMO) (PDF). 9th IAA Low-Cost Planetary Missions Conference. 21–23 June 2011. Laurel, Maryland.
  10. ^ "BepiColombo to Enter Implementation Phase". European Space Agency. 26 February 2007.
  11. ^ Amos, Jonathan. "Blast-off for BepiColombo on mission to Mercury". BBC News. Retrieved 20 October 2018.
  12. ^ Science with BepiColombo. ESA. Accessed: 23 October 2018.
  13. ^ Domingue, Deborah L.; Koehn, Patrick L.; et al. (August 2007). "Mercury's Atmosphere: A Surface-Bounded Exosphere". Space Science Reviews. 131 (1–4): 161–186. Bibcode:2007SSRv..131..161D. doi:10.1007/s11214-007-9260-9.
  14. ^ "BepiColombo: Fact Sheet". European Space Agency. 1 December 2016. Retrieved 13 December 2016.
  15. ^ "BepiColombo - Testing general relativity". European Space Agency. 4 July 2003. Archived from the original on 7 February 2014. Retrieved 7 February 2014.
  16. ^ Einstein’s general relativity reveals new quirk of Mercury’s orbit. Emily Conover, Science News. April 11, 2018,
  17. ^ a b "BepiColombo". National Space Science Data Center. NASA. 26 August 2014. Retrieved 6 April 2015.
  18. ^ "Mission Operations - Getting to Mercury". European Space Agency. Retrieved 7 February 2014.
  19. ^ a b c BepiColombo: Joint Mission to Mercury. Elizabeth Howell, Space.com. 21 October 2018.
  20. ^ BepiColombo Mercury mission tested for journey into 'pizza oven'. Stephen Clarke, Spaceflight Now. 17 July 2017.
  21. ^ Qualification of the T6 Thruster for BepiColombo. R. A. Lewis, J. Pérez Luna, N. Coombs. 30th International Symposium on Space Technology and Science 34th International Electric Propulsion Conference and 6th Nano-satellite Symposium, Hyogo-Kobe, Japan. July 4 – 10, 2015.
  22. ^ QinetiQ’s T6 and T5 Ion Thruster Electric Propulsion System Architectures and Performances. (PDF) Mark Hutchins, Huw Simpson. 30th International Symposium on Space Technology and Science 34th International Electric Propulsion Conference and 6th Nano-satellite Symposium, Hyogo-Kobe, Japan. July 4 – 10, 2015.
  23. ^ [1]
  24. ^ [2]
  25. ^ Clark, Stephen D.; Hutchins, Mark S.; et al. (2013). BepiColombo Electric Propulsion Thruster and High Power Electronics Coupling Test Performances. 33rd International Electric Propulsion Conference. 6–10 October 2013. Washington, D.C. IEPC-2013-133.
  26. ^ a b c d e "Mercury Planetary Orbiter - Spacecraft". European Space Agency. 20 October 2011. Retrieved 6 February 2014.
  27. ^ a b c "MMO (Mercury Magnetospheric Orbiter) : Objectives". JAXA. 2011. Retrieved 7 February 2014.
  28. ^ "Mercury Planetary Orbiter - Instruments". European Space Agency. 15 January 2008. Retrieved 6 February 2014.
  29. ^ http://sci.esa.int/bepicolombo/48872-spacecraft/
  30. ^ "Strofio". Discovery Program. NASA. Archived from the original on 8 January 2017. Retrieved 7 January 2017.
  31. ^ Yamakawa, Hiroshi; Ogawa, Hiroyuki; et al. (January 2004). "Current status of the BepiColombo/MMO spacecraft design". Advances in Space Research. 33 (12): 2133–2141. Bibcode:2004AdSpR..33.2133Y. doi:10.1016/S0273-1177(03)00437-X.
  32. ^ a b "Mercury Exploration Project "BepiColombo"" (PDF). JAXA. 2014. Retrieved 6 April 2015.
  33. ^ "A PAIR OF PLANETARY EXPLORERS AT MERCURY". esa.int. Retrieved 21 October 2018.
  34. ^ "BepiColombo's lander". European Space Agency. 20 February 2002. Retrieved 7 February 2014.

External links

Retrieved from "https://en.wikipedia.org/w/index.php?title=BepiColombo&oldid=868978663"
This content was retrieved from Wikipedia : http://en.wikipedia.org/wiki/BepiColombo
This page is based on the copyrighted Wikipedia article "BepiColombo"; it is used under the Creative Commons Attribution-ShareAlike 3.0 Unported License (CC-BY-SA). You may redistribute it, verbatim or modified, providing that you comply with the terms of the CC-BY-SA