Area
Area  

Common symbols 
A 
SI unit  Square metre [m^{2}] 
In SI base units  1 m^{2} 
Area is the quantity that expresses the extent of a twodimensional figure or shape, or planar lamina, in the plane. Surface area is its analog on the twodimensional surface of a threedimensional object. Area can be understood as the amount of material with a given thickness that would be necessary to fashion a model of the shape, or the amount of paint necessary to cover the surface with a single coat.^{[1]} It is the twodimensional analog of the length of a curve (a onedimensional concept) or the volume of a solid (a threedimensional concept).
The area of a shape can be measured by comparing the shape to squares of a fixed size.^{[2]} In the International System of Units (SI), the standard unit of area is the square metre (written as m^{2}), which is the area of a square whose sides are one metre long.^{[3]} A shape with an area of three square metres would have the same area as three such squares. In mathematics, the unit square is defined to have area one, and the area of any other shape or surface is a dimensionless real number.
There are several wellknown formulas for the areas of simple shapes such as triangles, rectangles, and circles. Using these formulas, the area of any polygon can be found by dividing the polygon into triangles.^{[4]} For shapes with curved boundary, calculus is usually required to compute the area. Indeed, the problem of determining the area of plane figures was a major motivation for the historical development of calculus.^{[5]}
For a solid shape such as a sphere, cone, or cylinder, the area of its boundary surface is called the surface area.^{[1]}^{[6]}^{[7]} Formulas for the surface areas of simple shapes were computed by the ancient Greeks, but computing the surface area of a more complicated shape usually requires multivariable calculus.
Area plays an important role in modern mathematics. In addition to its obvious importance in geometry and calculus, area is related to the definition of determinants in linear algebra, and is a basic property of surfaces in differential geometry.^{[8]} In analysis, the area of a subset of the plane is defined using Lebesgue measure,^{[9]} though not every subset is measurable.^{[10]} In general, area in higher mathematics is seen as a special case of volume for twodimensional regions.^{[1]}
Area can be defined through the use of axioms, defining it as a function of a collection of certain plane figures to the set of real numbers. It can be proved that such a function exists.
Contents
Formal definition
An approach to defining what is meant by "area" is through axioms. "Area" can be defined as a function from a collection M of special kind of plane figures (termed measurable sets) to the set of real numbers which satisfies the following properties:
 For all S in M, a(S) ≥ 0.
 If S and T are in M then so are S ∪ T and S ∩ T, and also a(S∪T) = a(S) + a(T) − a(S∩T).
 If S and T are in M with S ⊆ T then T − S is in M and a(T−S) = a(T) − a(S).
 If a set S is in M and S is congruent to T then T is also in M and a(S) = a(T).
 Every rectangle R is in M. If the rectangle has length h and breadth k then a(R) = hk.
 Let Q be a set enclosed between two step regions S and T. A step region is formed from a finite union of adjacent rectangles resting on a common base, i.e. S ⊆ Q ⊆ T. If there is a unique number c such that a(S) ≤ c ≤ a(T) for all such step regions S and T, then a(Q) = c.
It can be proved that such an area function actually exists.^{[11]}
Units
Every unit of length has a corresponding unit of area, namely the area of a square with the given side length. Thus areas can be measured in square metres (m^{2}), square centimetres (cm^{2}), square millimetres (mm^{2}), square kilometres (km^{2}), square feet (ft^{2}), square yards (yd^{2}), square miles (mi^{2}), and so forth.^{[12]} Algebraically, these units can be thought of as the squares of the corresponding length units.
The SI unit of area is the square metre, which is considered an SI derived unit.^{[3]}
Conversions
Calculation of the area of a square whose length and width are 1 metre would be:
1 metre x 1 metre = 1 m^{2}
and so, a rectangle with different sides (say length of 3 metres and width of 2 metres) would have an area in square units that can be calculated as:
3 metres x 2 metres = 6 m^{2}. This is equivalent to 6 million square millimetres. Other useful conversions are:
 1 square kilometre = 1,000,000 square metres
 1 square metre = 10,000 square centimetres = 1,000,000 square millimetres
 1 square centimetre = 100 square millimetres.
Nonmetric units
In nonmetric units, the conversion between two square units is the square of the conversion between the corresponding length units.
the relationship between square feet and square inches is
 1 square foot = 144 square inches,
where 144 = 12^{2} = 12 × 12. Similarly:
 1 square yard = 9 square feet
 1 square mile = 3,097,600 square yards = 27,878,400 square feet
In addition, conversion factors include:
 1 square inch = 6.4516 square centimetres
 1 square foot = 0.09290304 square metres
 1 square yard = 0.83612736 square metres
 1 square mile = 2.589988110336 square kilometres
Other units including historical
There are several other common units for area. The are was the original unit of area in the metric system, with:
 1 are = 100 square metres
Though the are has fallen out of use, the hectare is still commonly used to measure land:^{[12]}
 1 hectare = 100 ares = 10,000 square metres = 0.01 square kilometres
Other uncommon metric units of area include the tetrad, the hectad, and the myriad.
The acre is also commonly used to measure land areas, where
 1 acre = 4,840 square yards = 43,560 square feet.
An acre is approximately 40% of a hectare.
On the atomic scale, area is measured in units of barns, such that:^{[12]}
 1 barn = 10^{−28} square meters.
The barn is commonly used in describing the crosssectional area of interaction in nuclear physics.^{[12]}
In India,
 20 dhurki = 1 dhur
 20 dhur = 1 khatha
 20 khata = 1 bigha
 32 khata = 1 acre
History
Circle area
In the 5th century BCE, Hippocrates of Chios was the first to show that the area of a disk (the region enclosed by a circle) is proportional to the square of its diameter, as part of his quadrature of the lune of Hippocrates,^{[13]} but did not identify the constant of proportionality. Eudoxus of Cnidus, also in the 5th century BCE, also found that the area of a disk is proportional to its radius squared.^{[14]}
Subsequently, Book I of Euclid's Elements dealt with equality of areas between twodimensional figures. The mathematician Archimedes used the tools of Euclidean geometry to show that the area inside a circle is equal to that of a right triangle whose base has the length of the circle's circumference and whose height equals the circle's radius, in his book Measurement of a Circle. (The circumference is 2πr, and the area of a triangle is half the base times the height, yielding the area πr^{2} for the disk.) Archimedes approximated the value of π (and hence the area of a unitradius circle) with his doubling method, in which he inscribed a regular triangle in a circle and noted its area, then doubled the number of sides to give a regular hexagon, then repeatedly doubled the number of sides as the polygon's area got closer and closer to that of the circle (and did the same with circumscribed polygons).
Swiss scientist Johann Heinrich Lambert in 1761 proved that π, the ratio of a circle's area to its squared radius, is irrational, meaning it is not equal to the quotient of any two whole numbers.^{[15]} In 1794 French mathematician AdrienMarie Legendre proved that π^{2} is irrational; this also proves that π is irrational.^{[16]} In 1882, German mathematician Ferdinand von Lindemann proved that π is transcendental (not the solution of any polynomial equation with rational coefficients), confirming a conjecture made by both Legendre and Euler.^{[15]}^{:p. 196}
Triangle area
Heron (or Hero) of Alexandria found what is known as Heron's formula for the area of a triangle in terms of its sides, and a proof can be found in his book, Metrica, written around 60 CE. It has been suggested that Archimedes knew the formula over two centuries earlier,^{[17]} and since Metrica is a collection of the mathematical knowledge available in the ancient world, it is possible that the formula predates the reference given in that work.^{[18]}
In 499 Aryabhata, a great mathematicianastronomer from the classical age of Indian mathematics and Indian astronomy, expressed the area of a triangle as onehalf the base times the height in the Aryabhatiya (section 2.6).
A formula equivalent to Heron's was discovered by the Chinese independently of the Greeks. It was published in 1247 in Shushu Jiuzhang ("Mathematical Treatise in Nine Sections"), written by Qin Jiushao.
Quadrilateral area
In the 7th century CE, Brahmagupta developed a formula, now known as Brahmagupta's formula, for the area of a cyclic quadrilateral (a quadrilateral inscribed in a circle) in terms of its sides. In 1842 the German mathematicians Carl Anton Bretschneider and Karl Georg Christian von Staudt independently found a formula, known as Bretschneider's formula, for the area of any quadrilateral.
General polygon area
The development of Cartesian coordinates by René Descartes in the 17th century allowed the development of the surveyor's formula for the area of any polygon with known vertex locations by Gauss in the 19th century.
Areas determined using calculus
The development of integral calculus in the late 17th century provided tools that could subsequently be used for computing more complicated areas, such as the area of an ellipse and the surface areas of various curved threedimensional objects.
Area formulas
Polygon formulas
For a nonselfintersecting (simple) polygon, the Cartesian coordinates (i=0, 1, ..., n1) of whose n vertices are known, the area is given by the surveyor's formula:^{[19]}
where when i=n1, then i+1 is expressed as modulus n and so refers to 0.
Rectangles
The most basic area formula is the formula for the area of a rectangle. Given a rectangle with length l and width w, the formula for the area is:^{[2]}^{[20]}
 A = lw (rectangle).
That is, the area of the rectangle is the length multiplied by the width. As a special case, as l = w in the case of a square, the area of a square with side length s is given by the formula:^{[1]}^{[2]}^{[21]}
 A = s^{2} (square).
The formula for the area of a rectangle follows directly from the basic properties of area, and is sometimes taken as a definition or axiom. On the other hand, if geometry is developed before arithmetic, this formula can be used to define multiplication of real numbers.
Dissection, parallelograms, and triangles
Most other simple formulas for area follow from the method of dissection. This involves cutting a shape into pieces, whose areas must sum to the area of the original shape.
For an example, any parallelogram can be subdivided into a trapezoid and a right triangle, as shown in figure to the left. If the triangle is moved to the other side of the trapezoid, then the resulting figure is a rectangle. It follows that the area of the parallelogram is the same as the area of the rectangle:^{[2]}
 A = bh (parallelogram).
However, the same parallelogram can also be cut along a diagonal into two congruent triangles, as shown in the figure to the right. It follows that the area of each triangle is half the area of the parallelogram:^{[2]}
 (triangle).
Similar arguments can be used to find area formulas for the trapezoid^{[22]} as well as more complicated polygons.^{[23]}
Area of curved shapes
Circles
The formula for the area of a circle (more properly called the area enclosed by a circle or the area of a disk) is based on a similar method. Given a circle of radius r, it is possible to partition the circle into sectors, as shown in the figure to the right. Each sector is approximately triangular in shape, and the sectors can be rearranged to form an approximate parallelogram. The height of this parallelogram is r, and the width is half the circumference of the circle, or πr. Thus, the total area of the circle is πr^{2}:^{[2]}
 A = πr^{2} (circle).
Though the dissection used in this formula is only approximate, the error becomes smaller and smaller as the circle is partitioned into more and more sectors. The limit of the areas of the approximate parallelograms is exactly πr^{2}, which is the area of the circle.^{[24]}
This argument is actually a simple application of the ideas of calculus. In ancient times, the method of exhaustion was used in a similar way to find the area of the circle, and this method is now recognized as a precursor to integral calculus. Using modern methods, the area of a circle can be computed using a definite integral:
Ellipses
The formula for the area enclosed by an ellipse is related to the formula of a circle; for an ellipse with semimajor and semiminor axes x and y the formula is:^{[2]}
Surface area
Most basic formulas for surface area can be obtained by cutting surfaces and flattening them out. For example, if the side surface of a cylinder (or any prism) is cut lengthwise, the surface can be flattened out into a rectangle. Similarly, if a cut is made along the side of a cone, the side surface can be flattened out into a sector of a circle, and the resulting area computed.
The formula for the surface area of a sphere is more difficult to derive: because a sphere has nonzero Gaussian curvature, it cannot be flattened out. The formula for the surface area of a sphere was first obtained by Archimedes in his work On the Sphere and Cylinder. The formula is:^{[6]}
 A = 4πr^{2} (sphere),
where r is the radius of the sphere. As with the formula for the area of a circle, any derivation of this formula inherently uses methods similar to calculus.
General formulas
Areas of 2dimensional figures
 A triangle: (where B is any side, and h is the distance from the line on which B lies to the other vertex of the triangle). This formula can be used if the height h is known. If the lengths of the three sides are known then Heron's formula can be used: where a, b, c are the sides of the triangle, and is half of its perimeter.^{[2]} If an angle and its two included sides are given, the area is where C is the given angle and a and b are its included sides.^{[2]} If the triangle is graphed on a coordinate plane, a matrix can be used and is simplified to the absolute value of . This formula is also known as the shoelace formula and is an easy way to solve for the area of a coordinate triangle by substituting the 3 points (x_{1},y_{1}), (x_{2},y_{2}), and (x_{3},y_{3}). The shoelace formula can also be used to find the areas of other polygons when their vertices are known. Another approach for a coordinate triangle is to use calculus to find the area.
 A simple polygon constructed on a grid of equaldistanced points (i.e., points with integer coordinates) such that all the polygon's vertices are grid points: , where i is the number of grid points inside the polygon and b is the number of boundary points. This result is known as Pick's theorem.^{[25]}
Area in calculus
 The area between a positivevalued curve and the horizontal axis, measured between two values a and b (b is defined as the larger of the two values) on the horizontal axis, is given by the integral from a to b of the function that represents the curve:^{[1]}
 The area between the graphs of two functions is equal to the integral of one function, f(x), minus the integral of the other function, g(x):
 where is the curve with the greater yvalue.
 An area bounded by a function r = r(θ) expressed in polar coordinates is:^{[1]}
 The area enclosed by a parametric curve with endpoints is given by the line integrals:
(see Green's theorem) or the zcomponent of
Bounded area between two quadratic functions
To find the bounded area between two quadratic functions, we subtract one from the other to write the difference as
where f(x) is the quadratic upper bound and g(x) is the quadratic lower bound. Define the discriminant of f(x)g(x) as
By simplifying the integral formula between the graphs of two functions (as given in the section above) and using Vieta's formula, we can obtain^{[26]}^{[27]}
The above remains valid if one of the bounding functions is linear instead of quadratic.
Surface area of 3dimensional figures
 Cone:^{[28]} , where r is the radius of the circular base, and h is the height. That can also be rewritten as ^{[28]} or where r is the radius and l is the slant height of the cone. is the base area while is the lateral surface area of the cone.^{[28]}
 cube: , where s is the length of an edge.^{[6]}
 cylinder: , where r is the radius of a base and h is the height. The 2r can also be rewritten as d, where d is the diameter.
 prism: 2B + Ph, where B is the area of a base, P is the perimeter of a base, and h is the height of the prism.
 pyramid: , where B is the area of the base, P is the perimeter of the base, and L is the length of the slant.
 rectangular prism: , where is the length, w is the width, and h is the height.
General formula for surface area
The general formula for the surface area of the graph of a continuously differentiable function where and is a region in the xyplane with the smooth boundary:
An even more general formula for the area of the graph of a parametric surface in the vector form where is a continuously differentiable vector function of is:^{[8]}
List of formulas
Shape  Formula  Variables 

Regular triangle (equilateral triangle)  is the length of one side of the triangle.  
Triangle^{[1]}  is half the perimeter, , and are the length of each side.  
Triangle^{[2]}  and are any two sides, and is the angle between them.  
Triangle^{[1]}  and are the base and altitude (measured perpendicular to the base), respectively.  
Isosceles triangle  is the length of one of the two equal sides and is the length of a different side.  
Rhombus/Kite  and are the lengths of the two diagonals of the rhombus or kite.  
Parallelogram  is the length of the base and is the perpendicular height.  
Trapezoid  and are the parallel sides and the distance (height) between the parallels.  
Regular hexagon  is the length of one side of the hexagon.  
Regular octagon  is the length of one side of the octagon.  
Regular polygon  is the side length and is the number of sides.  
Regular polygon  is the perimeter and is the number of sides.  
Regular polygon  is the radius of a circumscribed circle, is the radius of an inscribed circle, and is the number of sides.  
Regular polygon  is the number of sides, is the side length, is the apothem, or the radius of an inscribed circle in the polygon, and is the perimeter of the polygon.  
Circle  is the radius and the diameter.  
Circular sector  and are the radius and angle (in radians), respectively and is the length of the perimeter.  
Ellipse^{[2]}  and are the semimajor and semiminor axes, respectively.  
Total surface area of a cylinder  and are the radius and height, respectively.  
Lateral surface area of a cylinder  and are the radius and height, respectively.  
Total surface area of a sphere^{[6]}  and are the radius and diameter, respectively.  
Total surface area of a pyramid^{[6]}  is the base area, is the base perimeter and is the slant height.  
Total surface area of a pyramid frustum^{[6]}  is the base area, is the base perimeter and is the slant height.  
Square to circular area conversion  is the area of the square in square units.  
Circular to square area conversion  is the area of the circle in circular units. 
The above calculations show how to find the areas of many common shapes.
The areas of irregular polygons can be calculated using the "Surveyor's formula".^{[24]}
Relation of area to perimeter
The isoperimetric inequality states that, for a closed curve of length L (so the region it encloses has perimeter L) and for area A of the region that it encloses,
and equality holds if and only if the curve is a circle. Thus a circle has the largest area of any closed figure with a given perimeter.
At the other extreme, a figure with given perimeter L could have an arbitrarily small area, as illustrated by a rhombus that is "tipped over" arbitrarily far so that two of its angles are arbitrarily close to 0° and the other two are arbitrarily close to 180°.
For a circle, the ratio of the area to the circumference (the term for the perimeter of a circle) equals half the radius r. This can be seen from the area formula πr^{2} and the circumference formula 2πr.
The area of a regular polygon is half its perimeter times the apothem (where the apothem is the distance from the center to the nearest point on any side).
Fractals
Doubling the edge lengths of a polygon multiplies its area by four, which is two (the ratio of the new to the old side length) raised to the power of two (the dimension of the space the polygon resides in). But if the onedimensional lengths of a fractal drawn in two dimensions are all doubled, the spatial content of the fractal scales by a power of two that is not necessarily an integer. This power is called the fractal dimension of the fractal. ^{[29]}
Area bisectors
There are an infinitude of lines that bisect the area of a triangle. Three of them are the medians of the triangle (which connect the sides' midpoints with the opposite vertices), and these are concurrent at the triangle's centroid; indeed, they are the only area bisectors that go through the centroid. Any line through a triangle that splits both the triangle's area and its perimeter in half goes through the triangle's incenter (the center of its incircle). There are either one, two, or three of these for any given triangle.
Any line through the midpoint of a parallelogram bisects the area.
All area bisectors of a circle or other ellipse go through the center, and any chords through the center bisect the area. In the case of a circle they are the diameters of the circle.
Optimization
Given a wire contour, the surface of least area spanning ("filling") it is a minimal surface. Familiar examples include soap bubbles.
The question of the filling area of the Riemannian circle remains open.^{[30]}
The circle has the largest area of any twodimensional object having the same perimeter.
A cyclic polygon (one inscribed in a circle) has the largest area of any polygon with a given number of sides of the same lengths.
A version of the isoperimetric inequality for triangles states that the triangle of greatest area among all those with a given perimeter is equilateral.^{[31]}
The triangle of largest area of all those inscribed in a given circle is equilateral; and the triangle of smallest area of all those circumscribed around a given circle is equilateral.^{[32]}
The ratio of the area of the incircle to the area of an equilateral triangle, , is larger than that of any nonequilateral triangle.^{[33]}
The ratio of the area to the square of the perimeter of an equilateral triangle, is larger than that for any other triangle.^{[31]}
See also
 Brahmagupta quadrilateral, a cyclic quadrilateral with integer sides, integer diagonals, and integer area.
 Equiareal mapping
 Heronian triangle, a triangle with integer sides and integer area.
 List of triangle inequalities#Area
 Oneseventh area triangle, an inner triangle with oneseventh the area of the reference triangle.
 Routh's theorem, a generalization of the oneseventh area triangle.
 Orders of magnitude (area)—A list of areas by size.
 Pentagon#Derivation of the area formula
 Planimeter, an instrument for measuring small areas, e.g. on maps.
 Quadrilateral#Area of a convex quadrilateral
 Robbins pentagon, a cyclic pentagon whose side lengths and area are all rational numbers.
References
 ^ ^{a} ^{b} ^{c} ^{d} ^{e} ^{f} ^{g} ^{h} Weisstein, Eric W. "Area". Wolfram MathWorld. Archived from the original on 5 May 2012. Retrieved 3 July 2012.
 ^ ^{a} ^{b} ^{c} ^{d} ^{e} ^{f} ^{g} ^{h} ^{i} ^{j} ^{k} "Area Formulas". Math.com. Archived from the original on 2 July 2012. Retrieved 2 July 2012.
 ^ ^{a} ^{b} Bureau International des Poids et Mesures Resolution 12 of the 11th meeting of the CGPM (1960) Archived 20130414 at WebCite, retrieved 15 July 2012
 ^ Mark de Berg; Marc van Kreveld; Mark Overmars; Otfried Schwarzkopf (2000). "Chapter 3: Polygon Triangulation". Computational Geometry (2nd revised ed.). SpringerVerlag. pp. 45–61. ISBN 3540656200.
 ^ Boyer, Carl B. (1959). A History of the Calculus and Its Conceptual Development. Dover. ISBN 0486605094.
 ^ ^{a} ^{b} ^{c} ^{d} ^{e} ^{f} Weisstein, Eric W. "Surface Area". Wolfram MathWorld. Archived from the original on 23 June 2012. Retrieved 3 July 2012.
 ^ Foundation, CK12. "Surface Area". CK12 Foundation. Retrieved 20181009.
 ^ ^{a} ^{b} do Carmo, Manfredo. Differential Geometry of Curves and Surfaces. PrenticeHall, 1976. Page 98, ISBN 9780132125895
 ^ Walter Rudin, Real and Complex Analysis, McGrawHill, 1966, ISBN 0071002766.
 ^ Gerald Folland, Real Analysis: modern techniques and their applications, John Wiley & Sons, Inc., 1999, Page 20, ISBN 0471317160
 ^ Moise, Edwin (1963). Elementary Geometry from an Advanced Standpoint. AddisonWesley Pub. Co. Retrieved 15 July 2012.
 ^ ^{a} ^{b} ^{c} ^{d} Bureau international des poids et mesures (2006). "The International System of Units (SI)" (PDF). 8th ed. Archived (PDF) from the original on 20131105. Retrieved 20080213. Chapter 5.
 ^ Heath, Thomas L. (2003), A Manual of Greek Mathematics, Courier Dover Publications, pp. 121–132, ISBN 0486432319, archived from the original on 20160501

^ Stewart, James (2003). Single variable calculus early transcendentals (5th. ed.). Toronto ON: Brook/Cole. p. 3. ISBN 0534393306. Archived from the original on 20120815.
However, by indirect reasoning, Eudoxus (fifth century B.C.) used exhaustion to prove the familiar formula for the area of a circle:
 ^ ^{a} ^{b} Arndt, Jörg; Haene l, Christoph (2006). Pi Unleashed. SpringerVerlag. ISBN 9783540665724. Retrieved 20130605. English translation by Catriona and David Lischka.
 ^ Eves, Howard (1990), An Introduction to the History of Mathematics (6th ed.), Saunders, p. 121, ISBN 0030295580
 ^ Heath, Thomas L. (1921). A History of Greek Mathematics (Vol II). Oxford University Press. pp. 321–323.
 ^ Weisstein, Eric W. "Heron's Formula". MathWorld.
 ^ Bourke, Paul (July 1988). "Calculating The Area And Centroid Of A Polygon" (PDF). Archived (PDF) from the original on 20120916. Retrieved 6 Feb 2013.
 ^ "Area of Parallelogram/Rectangle". ProofWiki.org. Archived from the original on 20 June 2015. Retrieved 29 May 2016.
 ^ "Area of Square". ProofWiki.org. Archived from the original on 4 November 2017. Retrieved 29 May 2016.
 ^ Averbach, Bonnie; Chein, Orin (2012), Problem Solving Through Recreational Mathematics, Dover, p. 306, ISBN 9780486131740, archived from the original on 20160513
 ^ Joshi, K. D. (2002), Calculus for Scientists and Engineers: An Analytical Approach, CRC Press, p. 43, ISBN 9780849313196, archived from the original on 20160505
 ^ ^{a} ^{b} Braden, Bart (September 1986). "The Surveyor's Area Formula" (PDF). The College Mathematics Journal. 17 (4): 326–337. doi:10.2307/2686282. Archived (PDF) from the original on 27 June 2012. Retrieved 15 July 2012.
 ^ Trainin, J. (November 2007). "An elementary proof of Pick's theorem". Mathematical Gazette. 91 (522): 536–540.
 ^ Matematika. PT Grafindo Media Pratama. pp. 51–. ISBN 9789797584771. Archived from the original on 20170320.
 ^ Get Success UN +SPMB Matematika. PT Grafindo Media Pratama. pp. 157–. ISBN 9786020000909. Archived from the original on 20161223.
 ^ ^{a} ^{b} ^{c} Weisstein, Eric W. "Cone". Wolfram MathWorld. Archived from the original on 21 June 2012. Retrieved 6 July 2012.
 ^ Mandelbrot, Benoît B. (1983). The fractal geometry of nature. Macmillan. ISBN 9780716711865. Archived from the original on 20 March 2017. Retrieved 1 February 2012.
 ^ Gromov, Mikhael (1983), "Filling Riemannian manifolds", Journal of Differential Geometry, 18 (1): 1–147, CiteSeerX 10.1.1.400.9154, MR 0697984, archived from the original on 20140408
 ^ ^{a} ^{b} Chakerian, G. D. (1979) "A Distorted View of Geometry." Ch. 7 in Mathematical Plums. R. Honsberger (ed.). Washington, DC: Mathematical Association of America, p. 147.
 ^ Dorrie, Heinrich (1965), 100 Great Problems of Elementary Mathematics, Dover Publ., pp. 379–380.
 ^ Minda, D.; Phelps, S. (October 2008). "Triangles, ellipses, and cubic polynomials". American Mathematical Monthly. 115: 679–689: Theorem 4.1. JSTOR 27642581. Archived from the original on 20161104.